How to Set a Timer for a Picture on iPhone

Timer photos on iPhone come from the Camera app’s timer control, which waits a few seconds after you tap the Shutter button and then takes the picture. On current iOS you reach it through the Camera Controls button or by swiping up from the camera modes, and it offers 3, 5 or 10 seconds. Older versions keep a Timer button in a row of controls with fewer delays. The quickest way to tell which one you have is to look at the screen.

Which Camera layout do you see?

Open Camera, make sure Photo is selected, and compare what you see with this table. It is built from Apple’s iPhone User Guide for current iOS, iOS 26 and iOS 18.

What you see How you reach Timer Delays offered Turning it off
Current iOS: swiping up from the camera modes opens a panel of tools Camera Controls button or swipe up, then Timer 3, 5 or 10 seconds Camera Controls, Timer, then tap the timer icon
iOS 26: the same panel, with the delays shown as 3s, 5s and 10s Camera Controls button or swipe up, then Timer 3s, 5s or 10s Camera Controls, Timer, then Off
Older versions: a row of separate buttons, including a Timer button Camera Controls button, then the Timer button 3s or 10s Not described in Apple’s guide for this layout

Set the delay and take the picture

These steps follow Apple’s current guide. On iOS 26, the only difference is that the delays read 3s, 5s and 10s.

  1. Open Camera on your iPhone.
  2. Tap the Camera Controls button, or swipe up from the camera modes at the bottom of the screen.
  3. Tap Timer, then tap 3, 5 or 10.
  4. Tap the screen to close the panel and frame your shot.
  5. Optional: touch and hold the spot you want sharp until you see AE/AF Lock. This keeps focus and exposure from shifting when you step into the frame. Tap the screen later to release it.
  6. Tap the Shutter button to start the timer, then get in the frame.

When the countdown ends, the iPhone takes the picture without another tap.

To stop using the timer on current iOS, tap the Camera Controls button, tap Timer, then tap the timer icon to turn it off. On iOS 26, tap Timer and then Off.

If you only see 3s and 10s

Apple’s guide for iOS 18 describes a slightly different route:

  1. Open Camera and tap the Camera Controls button.
  2. Tap the Timer button, then choose 3s or 10s.
  3. Tap the Shutter button to start the timer.

The illustration below shows this older layout; current screens may look different. Apple’s guides for iOS 26 and later add the 5-second option, so if your iPhone can install a newer iOS, check Settings > General > Software Update.

iPhone Camera app with the controls row open and the timer set to 10s highlighted
(1) Tap the Timer icon, then (2) choose 3s or 10s. (Illustration)

Prop the phone and frame the shot before the countdown

The timer only removes the tap. The rest of a good timer photo comes from setup, and a few choices make a big difference:

  • Pick the delay for the job. Three seconds suits a phone on a tripod where you just want to avoid shaking it with your finger. Ten seconds gives you time to walk into a group shot and settle. Five sits in between, handy when you only need to step back a pace.
  • Find a steady base. A small tripod, a shelf or a stack of books all work. Lean the phone so the lens is level rather than tilted up at the ceiling.
  • Frame with room to spare. Leave space around the edges for the person who joins last. The on-screen grid helps keep horizons straight; see turning on the camera grid on iPhone.

Trigger the shutter without touching the screen

Sometimes a timer is not the best fit, for example when you want to choose the exact moment. Apple documents a few other ways to take the shot:

  • Volume buttons: Apple’s selfie instructions say you can tap the Shutter button, press either volume button, or click the Camera Control to take the picture.
  • Camera Control: on supported models, click the Camera Control to open Camera, then click again to take a photo.
  • Apple Watch: the Camera Remote app shows the iPhone camera’s view on your wrist. Tap the Shutter button on the watch, and by default the shot is taken with a 3-second timer. Under More Options you can turn the 3-second timer on or off. The watch needs to be within normal Bluetooth range of the iPhone, which Apple puts at about 33 feet (10 meters). More detail is in taking iPhone photos from your Apple Watch.

Want a string of shots instead of one? Apple’s burst instructions are to drag the Shutter button left, or to turn on Use Volume Up for Burst in Settings > Camera and hold Volume Up. Here’s how to take burst photos with the volume button. Apple’s pages do not describe how the timer and burst mode work together, so treat any claim about a timer burst with caution.

Camera timer questions

Why is there no Timer in my camera controls?

Apple lets you customize the camera tools: tap the Camera Controls button, then tap Edit to reveal the tools. If you have removed some, Apple’s tip is to tap Reset to Essentials to return to the default set.

Will my timer photo be a Live Photo?

Possibly. Apple says Live Photo is on by default, and the Live control in the camera tools offers Auto, On and Off. Check that setting before the countdown if you want a still picture; turning Live Photos on or off has the details.

Can I record a video on a delay?

Apple documents the Camera app’s timer for photos. For video, the Apple Watch Camera Remote can start a recording: touch and hold the Shutter button on the watch until the recording begins.

Is the timer setting the same as the Clock app’s timer?

No. The Clock app’s timer counts down for things like cooking and does not take pictures. The photo delay lives only in the Camera app’s tools, as described above.

For Apple’s own wording, keep its page on using iPhone camera tools to set up your shot handy. Once the timer is set, prop the phone, tap the Shutter button and walk into the frame.

Related guides