Activation is what removes the Activate Windows watermark. The text shows up on a copy of Windows that is not activated, and the way Microsoft supports getting rid of it is to activate Windows with a valid product key or digital license. Start by opening the Activation page in Settings to see what Windows says about your copy; that status points you to the right fix below.
Why the message appears
The watermark is a symptom, not the problem. Microsoft’s page Why can’t I activate Windows? lists six reasons a copy of Windows ends up not activated:
- Missing product key or digital license. Windows was installed without one, or the license was never applied to this PC.
- A different product key or version of Windows was used during repair. Windows was reinstalled during a repair with a key or version that does not match the PC’s license.
- One copy of Windows was installed on multiple PCs. Microsoft marks a key that was used on multiple devices as not valid.
- Counterfeit software. Copies that are not genuine do not activate.
- A pre-owned PC. The seller may have used the product key on too many PCs. Microsoft says to ask the seller for the original Windows media and key.
- Hardware changes. Replacing a major part, such as the motherboard, can make Windows stop recognizing the license it had.
If the text appeared on a PC that used to be activated, check the hardware-change and edition-mismatch codes in the error table below first.
What your Activation page says
On current versions of Windows 11, select Start, then Settings > System > Activation. Your status is listed next to Activation status. Microsoft uses these wordings:
- Windows is activated
- Windows is activated with a digital license
- Windows is activated with a digital license linked to your Microsoft account
- Windows is not activated
A digital license, which Microsoft says is called a digital entitlement in Windows 11, is a way of activating that does not need you to type a product key. If the status says Windows is not activated, match what you see to a row in this table.
| What you see or know | What to do |
|---|---|
| You have a product key from a retail box, an email receipt or a store purchase | Enter it with Change product key (next section). |
| The PC was activated before you replaced a part | Run the Activation troubleshooter and choose the hardware-change option. |
| An error code appears on the Activation page | Look the code up in the error table below. |
| You never had a license for this PC | Buy one through Go to Store or from the PC’s maker. |
| The PC belongs to an employer or school | Contact the IT department. Do not enter your own key. |
For a closer look at reading the status on an older PC, see how to tell if Windows 10 is activated.
Enter a product key you own
Use this when you have a genuine key for the edition of Windows installed on the PC.
- Go to Start > Settings > System > Activation.
- Select Change product key.
- Type the 25-character product key and follow the prompts.
- Check Activation status again. When it reads as activated, restart the PC and look at the desktop corner.
The key has to match your edition. Microsoft’s heading on its Activate Windows page says it plainly: “Your Windows 11 edition must match your license.” If your license doesn’t match the edition installed, Windows will not activate. If you cannot find your key, finding your Windows product key lists the places it usually lives. People comfortable with a command window can use the method in activating Windows from Command Prompt with their own key instead.
Tie your license to a Microsoft account
Linking does not activate a PC by itself, but it makes reactivation much easier later. On the Activation page of an activated PC, select Add an account, sign in with your Microsoft account and select Sign in. The status should then read Windows is activated with a digital license linked to your Microsoft account. Do this before you replace a motherboard if you can.
Moved to new hardware? Use the troubleshooter
If Windows was activated with a digital license and stopped after a hardware change, Microsoft’s reactivation steps walk you through the Activation troubleshooter. You need an administrator account.
- Go to Start > Settings > System > Activation and select Troubleshoot.
- Select I changed hardware on this device recently, then select Next.
- Sign in with the Microsoft account that the license was linked to.
- In the list of devices, select the check box next to This is the device I’m using right now.
- Select Activate.
Microsoft’s error page adds that if Windows came preinstalled on your device and you replaced the motherboard, you may need to purchase a new license.
Microsoft notes that the Troubleshoot option is available only while your copy of Windows 11 is not activated; once you activate, the option disappears. The Activation troubleshooter page covers its other cases, such as an edition that does not match the license.
No license yet: buy one
If the PC never had a valid license, for example a used computer or a build you put together yourself, the honest fix is to buy one. On the Activation page, select Go to Store to purchase a Windows license from Microsoft. A new PC that should have come with Windows is a question for the PC’s maker or the store that sold it, because the license is supposed to arrive with the machine.
Buy only from Microsoft or the PC’s maker. Microsoft’s error page says a product key that was used, or that someone tried to use, on multiple devices is marked as not valid (error 0xC004C003), and Microsoft lists counterfeit software among the reasons Windows cannot activate.
A PC that was set up by someone else with a volume or KMS activation needs to be cleaned up first; removing KMS activation and activating legally covers that situation.
Error codes Microsoft explains
When activation fails, the Activation page shows a code. These are the ones most tied to the watermark, in Microsoft’s words from Get help with Windows activation errors:
| Code | What Microsoft says | Where to go next |
|---|---|---|
| 0xC004F211 | Windows reported that the hardware of your device has changed. | The troubleshooter section above. |
| 0xC004F213 | Windows reported that no product key was found on your device. | Enter a key you own, or buy a license. |
| 0xC004F212 | The product key used on this device isn’t compatible with this edition of Windows. | Run the Activation troubleshooter; it tells you if it finds a license for a different edition. |
| 0x803F7001 | A valid Windows 11 license could not be found. | Settings > System > Activation > Change product key. |
| 0xC004C003 | The product key you entered isn’t valid; a key used on multiple devices is marked as not valid. | Contact the seller of the key or the PC maker. |
| 0xC004F034 | An invalid product key or a key for a different version of Windows. | On a work PC that uses a KMS server, contact your organization’s support person. |
| 0xC004FC03 | The PC is not connected to the internet, or firewall settings are preventing online activation. | Make sure you are connected to the internet and your firewall isn’t blocking Windows from activating, then try again. |
| 0x80072F8F | The device’s date and time are incorrect, or Windows has trouble reaching the activation service. | Check Start > Settings > Time & language > Date & time. |
For any code not listed here, search Microsoft’s error page for the exact code before trying anything else.
Work or school PCs
Computers from an employer or a school are usually activated through the organization’s own licensing. If one of them shows the watermark, the fix belongs to the IT department, which manages that license. Report the message to IT rather than entering a key of your own.
If the PC runs Windows 10
Microsoft states that “Windows 10 has reached the end of support on October 14, 2025.” The activation routes above work on Windows 10 too, but Microsoft’s current activation pages are written for Windows 11, so the Windows 10 menus are not spelled out there. On Windows 10, open the Activation page in Settings and look for the same status text and the Change product key option. To replace a Windows 10 key, see how to change the product key in Windows 10.
Activation watermark questions
Is there a setting that removes the text without activating?
Microsoft documents none. Its activation pages describe one route to a clean desktop: a valid license, applied through the Activation page. Registry edits, scripts and downloaded tools that claim otherwise are not documented by Microsoft, and this article does not cover them.
The watermark is still there after I entered a key. What now?
Check the Activation page first. If it still says Windows is not activated, note the error code and look it up in the table above; a key for a different edition (0xC004F212) is one possibility Microsoft lists. If the status says activated, restart the PC.
Does the watermark mean my copy of Windows is counterfeit?
Not necessarily. Counterfeit software is one of six reasons Microsoft lists. A hardware change, a missing key or a repair done with a different key can cause the same message on a genuine copy.
I bought a used PC and it shows the watermark. Who fixes it?
Microsoft lists a pre-owned PC as its own reason for activation failures. Ask the seller for the license details first. If there is no valid license, buy one through Go to Store.
For every activation method in one place, including digital licenses after a reinstall, read how to activate Windows 11 or Windows 10. Then return to the Activation page and confirm the status reads activated.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.