Set up Book fold first, then print: before you change any setting, check three things that cause most ruined booklets (whether your printer prints both sides, which paper you will fold, and whether the page count is a multiple of four). Word’s Book fold setting then arranges the pages so the folded stack reads in order.
These steps cover desktop Word in Microsoft 365, Word 2024 and Word 2021 on Windows and Mac.
Before You Print: Check Printer, Paper and Page Count
Most booklet problems start before Book fold is even switched on. A two-minute check saves a stack of wasted paper:
- Can your printer print both sides by itself? If it can, Word sends the whole job in one go. If it can’t, you will print the fronts, turn the stack over and feed it back in, which works fine but needs a little care.
- Which paper will you fold? Microsoft notes that the finished booklet is half the width of the paper you choose. Letter paper (8.5 x 11 inches) folds to 5.5 x 8.5 inches, and A4 folds to A5.
- How many pages do you have? Each folded sheet carries four booklet pages, two on the front and two on the back, so count them and round up to the next multiple of four: 8, 12, 16, 20 and so on. A 10-page document needs 12 pages, so plan what goes on the last two instead of letting them come out blank by accident; an inside back cover and a back cover are the usual choices, rather than a blank spread in the middle.
- Is the content already laid out on full pages? Book fold halves the page, so large pictures, tables and text boxes may need resizing afterward. Turning Book fold on before you lay out the content saves rework.
If you only want two ordinary pages side by side on each sheet, with no folding, that is a different setting: see printing two pages on one sheet in Word.
Turn On Book Fold in Page Setup
Microsoft’s instructions for creating a booklet or book in Word use the Page Setup dialog:
- Open the document and select the Layout tab (older versions call it Page Layout).
- Select Margins, then Custom Margins.
- In the dropdown next to Multiple pages, select Book fold. The orientation changes to Landscape automatically.
- Under Sheets per booklet (called Sheets in booklet in Word for Mac), choose how many pages go into each booklet. The next section explains when to change it.
- Increase Gutter to reserve space on the inside fold for binding.
- On Windows, go to the Paper tab and select the Paper size. On a Mac, check the paper size under File > Page Setup.
- Select OK.

On screen, the document now shows narrow portrait pages. That is expected: each one is half a sheet. Scroll through and fix anything that no longer fits, such as a picture that spills off a page or a table that wraps badly.
Prefer a designed starting point? Microsoft’s booklet template instructions say to go to File > New, type booklet in the search box, pick a template and choose Create, then use File > Save a copy before you edit. Templates are also a good fit for brochures; for that layout, see making a brochure in Microsoft Word.
Microsoft’s booklet and template steps are written for the desktop versions of Word for Windows and Word for Mac, so if you work in Word for the web, open the file in the desktop app to set up Book fold. Microsoft also suggests adding page numbers in the header or footer. To style them, see adding a custom header or footer in Microsoft Word.
What Each Book Fold Setting Does
| Setting | What it controls | Practical choice |
|---|---|---|
| Multiple pages: Book fold | Arranges the pages so the folded stack reads in order; switches to Landscape | Turn it on before printing; leave orientation alone |
| Sheets per booklet / Sheets in booklet | How many pages go into each booklet | Keep the whole document as one booklet for short jobs; split long ones (next section) |
| Gutter | Extra space on the inside fold for binding | Raise it a little if text runs into the fold or the staples |
| Paper size | The sheet you print on; the booklet is half its width | Match the paper actually loaded in the printer |
| Margins | White space around the text on each booklet page | Check the result after switching on Book fold, since the pages are now smaller |
The gutter has no single right value. A thin stapled booklet needs very little; a thick one, or one you plan to bind with a comb or tape, needs more. Print a test sheet (below) and look at how close the text sits to the fold.
Long Documents: Splitting Into Several Booklets
Microsoft suggests splitting a long document into multiple booklets that you bind into one book. When every sheet nests inside the next, a thick stack folds badly: the middle sheets push outward and the outer edge turns into a staircase. The Sheets per booklet setting is how you avoid that. Instead of one booklet holding every page, you tell Word to build several smaller booklets, print them, fold each one separately, then stack them in order and bind them together.
A worked example: a 48-page club handbook on Letter paper needs 12 sheets in total. As one booklet, all 12 sheets nest together. With a smaller number per booklet, Word divides the pages into groups, and you end up with several thin folded sections that lie flatter when stacked. Each section is still a multiple of four pages, so plan blanks or section dividers accordingly.
For short programs, menus and zines of a few sheets, one booklet is simpler and folds well.
Print a Test Sheet, Then the Whole Booklet
Print a single sheet first. Fold it, flip through it, and check that the page numbers run in order and nothing is upside down. Microsoft’s template page suggests testing with four pages, which is exactly one folded sheet.
Word for Windows
- Select File > Print.
- Choose the printer and confirm the paper size matches the paper in the tray.
- Open the sides setting, which shows Print One Sided by default.
- If the printer prints both sides automatically, choose the two-sided option that flips the sheets on the short edge. If it doesn’t, select Manually Print on Both Sides.
- Select Print. With the manual option, Word prints the first side and then prompts you to feed the pages back into the printer.
Microsoft’s advice for manual printing is to flip the sheets on the short edge of the paper so the backs don’t print upside down. Before you reload, note which way the printed side faces and which edge went in first; printers differ, and the test sheet tells you how yours behaves. For more on two-sided jobs in general, see printing back to back in Word.
Word for Mac
- Select File > Print.
- Under Two-sided, select Booklet.
- Select Print.
Microsoft adds that if your printer doesn’t support automatic printing on both sides, you’ll need to print the pages manually.
Fix It by Symptom
| What you see | Likely cause | Fix |
|---|---|---|
| Every back page is upside down | The sheets were flipped on the long edge | Choose short-edge flipping, or turn the stack the other way when reloading for manual printing |
| Pages are out of order after folding | The stack was reversed or shuffled when reloading, or sheets were folded separately | Keep the sheets in the order they came out and fold the whole stack together |
| Pages are tiny or shuffled twice | The printer’s own booklet option was used on top of Word’s Book fold | Use one or the other, not both |
| Text disappears into the fold or under staples | Gutter too small | Increase Gutter in Page Setup and print a new test sheet |
| Blank pages at the back | Page count is not a multiple of four | Add content or deliberate blank pages so the total divides by four |
| Pictures or tables cut off | Content sized for a full page | Resize them for the half-size page |
If Word warns about the margins when you print, your printer may not be able to print that close to the edge. Increase the margins slightly and check the test sheet again.
Fold, Nest and Staple the Booklet
- Keep the sheets in the order they came out of the printer.
- Fold the whole stack in half along the short side, with the first page on the outside.
- Crease firmly with a ruler edge or a bone folder.
- Staple along the fold. A long-reach stapler reaches the spine; without one, open the stack flat on a piece of cardboard and staple from the outside, then bend the staple legs closed by hand.
- For thicker booklets, trim the open edge with a paper cutter, since the inner sheets stick out slightly further than the outer ones.
Split-section booklets from the previous step are folded one section at a time, stacked in order and then stapled or bound together.
Booklet printing answers
Can I use my printer’s own booklet feature instead?
You can, but only on a document without Book fold. Using both rearranges the pages twice. If your file is already a PDF, the booklet option in a PDF reader’s print dialog does the same job; to make a PDF from Windows, see printing to PDF on Windows.
Need a different folded format? A tri-fold brochure in Word uses one sheet and three panels, and splitting a page in half in Word compares columns, tables and text boxes when you don’t need folding at all. For a booklet, start with a single test sheet: it answers the paper, flipping and gutter questions in one go.
If the booklet needs a paper size Word does not list, change the paper size in Word on the Paper tab first.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.