Lockouts on a Windows 10 account usually clear on their own once the PC’s lockout duration has passed, so waiting is the first thing to try. If you can’t wait, anyone signed in to a second administrator account on the same PC can clear the lock right away from Computer Management. A disabled account is a different problem with a different fix, and the table below sorts out which one you have.
Locked out, disabled or just locked?
| What you see | What it means | Who can fix it |
|---|---|---|
| The lock screen, and your password or PIN works once you get past it | An ordinary screen lock, not an account problem | You. To change when it appears, see stopping Windows 10 from locking after inactivity |
| Windows refuses the correct password and says the account is locked out | Too many wrong passwords triggered the PC’s account lockout policy | Time, or another administrator on the PC |
| Windows says the account is disabled | An administrator turned the account off | Another administrator on the PC |
| A message that your Microsoft account is locked | Microsoft locked the online account | You, at account.microsoft.com |
| You simply don’t remember the password | Not a lock at all | A password reset (see the last section) |
| A work or school PC | Your organization sets the lockout rules | Your IT team |
The exact wording of the sign-in message varies, so go by whether it says “locked out” or “disabled.” If the password works but Windows opens an empty desktop with a temporary profile notice, that’s another problem: see signed in with a temporary profile and what to do next.
One note before the steps: Microsoft’s end of support notice says “Windows 10 has reached the end of support on October 14, 2025,” so a Windows 10 PC no longer gets security updates unless it’s enrolled in Extended Security Updates.
How the lockout policy decides when you’re let back in
Three settings control a lockout, and knowing them tells you whether waiting will work:
- Account lockout threshold is the number of failed sign-in attempts that locks the account. Microsoft’s lockout threshold reference allows 1 through 999, and a value of 0 means the account is never locked.
- Account lockout duration is how many minutes a locked account stays locked before it becomes available again on its own (1 through 99,999). Per the lockout duration reference, a value of 0 keeps it locked “until an administrator explicitly unlocks it.”
- Reset account lockout counter after is how many minutes must pass after a failed attempt before the count of failed attempts goes back to 0. Microsoft’s counter reset reference says it must be less than or equal to the lockout duration.
There’s no single Windows 10 lockout time. Microsoft’s default values table for the threshold shows 0, which means no lockout at all. Its account lockout update notes (KB5020282) give a baseline recommendation of 10/10/10 (10 failed attempts, a 10-minute counter reset and a 10-minute lockout) and say it’s applied by default only on new setups; PCs updated after setup aren’t changed.
Wait for the lockout to end
- Stop trying passwords. Each wrong attempt counts toward the threshold.
- Leave the PC for the lockout duration. Microsoft’s baseline recommendation is 10 minutes, but your PC’s setting may be longer, so allow extra time before the next attempt.
- Check Caps Lock and the keyboard language indicator, then type the password once, carefully.
Still refused after a long wait? The duration may be 0 or very long, which calls for an administrator.
Clear the lock from another administrator account
This works only if the PC has a second account with administrator rights that someone can sign in to, such as a parent’s account on a family PC. Every step happens while signed in to that account.
- On the sign-in screen, choose the other administrator account and sign in.
- Search for Computer Management from the taskbar and open it.
- Expand Local Users and Groups > Users.
- Right-click the locked account and select Properties.
- On the General tab, clear the check box that says the account is locked out. If the disabled check box is also selected, clear it too.
- Select OK, sign out, and let the account’s owner sign in with the correct password.

The problem here is the lock, not the password, so there’s no need to set a new one. Giving someone a new password from an administrator account is a separate task, covered in resetting a Windows 10 password with net user. If Local Users and Groups doesn’t appear in Computer Management on your PC, wait out the lockout instead.
Turn a disabled account back on
A disabled account stays off until an administrator turns it back on; waiting does nothing. Clearing the disabled check box in the steps above is one way. The other is the net user command, run from the second administrator account:
- Open Command Prompt as an administrator.
- Type
net user UserName, using the account’s name in place ofUserName, and press Enter. This displays information about the account. - Type
net user UserName /active:yesand press Enter.
Microsoft’s net user reference describes /active as the switch that “enables or disables the user account.” It doesn’t describe the switch as clearing a lockout, so for a locked-out account use Computer Management or wait.
Change how strict the lockout policy is
If lockouts keep happening, an administrator can adjust the policy. Microsoft’s Account Lockout Policy overview lists these settings for the Pro, Enterprise, Pro Education/SE and Education editions; Home isn’t on that list. On a work or school PC, the organization’s policy wins, so ask IT.
Before you change anything: a threshold of 0 means the account is never locked, which removes the protection against someone guessing passwords. Microsoft calls 10 “an acceptable starting point” for the threshold.
- Press Windows logo key + R, type
secpol.msc, and press Enter to open Local Security Policy. - Go to Account Policies > Account Lockout Policy. Microsoft documents this location as Computer Configuration\Windows Settings\Security Settings\Account Policies\Account Lockout Policy.
- Double-click the setting to change, enter the new value, and select OK.
A locked Microsoft account is a separate lock
If the message is about your Microsoft account, nothing on the PC will clear it. Microsoft’s locked Microsoft account page says to sign in at account.microsoft.com, and to use the Microsoft account sign-in helper if you can’t sign in. If you’ve forgotten the password, Microsoft’s forgotten password steps start with “Forgot password?” on the sign-in page.
When no other administrator account exists
With only one administrator account and a lockout, waiting is the route that keeps everything as it is. If the real problem is a forgotten password:
- A Microsoft account password can be reset from any device with the steps above.
- For a local account, Microsoft’s local account password page describes selecting Reset password on the sign-in screen after a wrong attempt and answering your security questions, or choosing Use a password reset disk instead if you made one. More routes are in how to reset a Windows password without logging in.
- Microsoft’s local account page adds that without an administrator account to change the password, “you will need to reset your Windows device.” Its recovery options page starts that from Windows Recovery Environment with Troubleshoot > Reset this PC, where you choose to keep your personal files or remove everything. Apps and settings are removed either way, and removing everything deletes your files. The full process is in factory resetting Windows 11 and 10.
Tools that claim to get around the Windows sign-in aren’t covered here, because they can damage Windows or trigger BitLocker recovery. On current versions of Windows 11, the same situation is covered in getting back into a locked Windows 11 admin account.
Once you’re back in, a spare administrator account is the cheapest insurance against the next lockout. Creating a new user on Windows 10 takes a few minutes, and if you ever tidy up accounts later, keep at least one spare before removing an administrator account.
Account lockout answers
Can the built-in Administrator account be locked out?
KB5020282 describes a policy named Allow Administrator account lockout. When it’s on, the built-in Administrator can be locked out for network sign-ins such as Remote Desktop, while signing in at the PC itself is still allowed.
Should I set the lockout threshold to 0 so this never happens again?
It stops lockouts, but anyone at the PC can then keep guessing passwords without limit. Microsoft’s security baselines say 10 attempts could be an acceptable starting point.
After clearing a lock for someone else, have them sign in once while you’re there, so you know the password works.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.