Signed In With a Temporary Profile in Windows 10? What to Do

Temporary profiles start fresh at every sign-in, so anything you save to the desktop or Documents during this session disappears when you sign out. First, copy whatever you created or changed today to a USB stick or external drive, because Microsoft says those files “will be lost when you sign out.” What to do next depends on whether this happened once, keeps happening, or is on a work or school PC, and the table below sorts that out.

What you see, what it means

Windows shows this problem in two ways, and Microsoft treats them as the same situation on both Windows 10 and Windows 11: Windows could not load your profile, so it created a temporary one and signed you in with that instead. Use the table to decide where to start.

What you see What it usually means Where to start
A notification that says “You’ve been signed in with a temporary profile,” and the desktop looks brand new Windows could not open your normal profile at this sign-in Save this session’s work, then restart and sign in again
An error that says “We can’t sign in to your account” The same problem, reported before the desktop appears Same as above
The message comes back after every restart Something keeps getting in the way at sign-in, such as security software scanning your files or damaged Windows files Safe Mode, then security software, then the disk and system file checks
The message appears even in Safe Mode Safe Mode did not help System Restore, or Microsoft’s new-account route
It happens on a work or school PC Your organization may manage profiles centrally Save your work and contact your IT team

Before you restart: get this session’s files out

Treat the temporary session as disposable. Microsoft’s advice is to “use an external storage device to save any work you’ve done since your last successful sign in,” and that applies even if you only spent a few minutes in it.

  1. Plug in a USB flash drive or an external hard drive.
  2. Open File Explorer and look in the Desktop, Documents and Downloads folders of the session you are in now. Anything you made or edited since the message appeared is there.
  3. Copy those files to the external drive, then eject it.
  4. Avoid installing apps or setting up accounts in this session. It all belongs to the temporary profile and will not carry over.

Leave your normal user folder alone while you work through the fixes. Do not rename, move or delete anything inside C:\Users, because the goal is for Windows to find that folder exactly where it expects it.

If it happened once

Restart

  1. Select Start > Power > Restart. Signing out is not enough; let the PC fully restart.
  2. Sign in with your usual account and password.
  3. If the desktop looks like yours again, with your wallpaper and files, you are done. Copy anything from the USB drive back into place.

Microsoft notes that you might need to restart more than once, so give it a couple of tries before moving on.

Your own profile is back when all of these are true:

  • The notification does not appear after you sign in.
  • Your wallpaper, desktop icons and taskbar layout look the way they did before.
  • Your Documents, Pictures and Downloads folders show your files rather than empty folders.
  • Apps open with your settings and recent files instead of first-run screens.

Safe Mode, then a normal restart

Microsoft’s first suggestion for this message is to restart in Safe Mode and sign in with your original profile, then restart in normal mode and sign in again. Safe Mode loads a minimal set of drivers and startup apps, which can be enough to let Windows open your profile.

  1. Hold Shift while you select Power > Restart, either from the Start menu or from the sign-in screen. On Windows 10 you can also go to Settings > Update & Security > Recovery and select Restart now under Advanced startup.
  2. On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.
  3. When the list appears, press 4 or F4 for Safe Mode, or 5 or F5 for Safe Mode with Networking.
  4. Sign in with your account password. A PIN or face sign-in is not available in Safe Mode, so have the password ready.
  5. Check whether your desktop and files look normal, then restart the PC normally and sign in again.

If the PC keeps starting in Safe Mode, press Windows logo key + R, type msconfig, open the Boot tab and clear Safe boot. The full set of routes, including what to do when Windows will not reach the desktop, is in booting into Safe Mode on Windows 11 and Windows 10, and Microsoft describes the recovery screens on its Windows Recovery Environment page.

If it comes back after every restart

Security software and a Defender scan

Some antivirus programs scan your profile files as you sign in, and that can stop Windows from loading them. Microsoft suggests temporarily disabling your antivirus software, or any other app that scans while you sign in, and then restarting.

  1. Open the third-party antivirus or backup app and turn off its real-time protection or scanning for now.
  2. Restart and sign in.
  3. If your normal profile loads, check for an update to that app or contact its maker, then turn its protection back on.

Microsoft also warns that some antivirus products leave parts running even when disabled, and those only go away when the product is uninstalled and the PC is restarted.

While you are at it, run a scan with Microsoft Defender to rule out malware. Microsoft’s steps for starting a Microsoft Defender scan lead to Quick scan in Windows Security, with Scan options holding the deeper checks, including Microsoft Defender Offline, which Microsoft calls the most complete scan. Keep Defender itself switched on throughout.

DISM, SFC and chkdsk

Damaged Windows files can stop a profile from loading. Microsoft’s System File Checker page pairs two commands for this, and you need an administrator account to run them.

  1. Search for cmd, right-click Command Prompt and select Run as administrator. Select Yes if Windows asks for permission.
  2. Type DISM.exe /Online /Cleanup-image /Restorehealth and press Enter. This can take several minutes.
  3. Type sfc /scannow and press Enter. Do not close the window until the verification reaches 100%.
  4. Read the last line. “Windows Resource Protection did not find any integrity violations” means the system files are fine; other messages mean files were repaired or need more work.
  5. Restart and sign in with your normal account.

Each possible result and its next step is explained in using System File Checker in Windows 10. The disk itself is a separate check: Check Disk (chkdsk) looks for file system errors, and on the drive Windows runs from it usually has to run at the next restart. How to run it and read the results is covered in fixing disk errors with CHKDSK.

If Windows asks for an administrator password you do not have, stop here and ask the person who manages the PC.

System Restore

If the message started right after an update, a driver install or a new app, a restore point from before that day may bring things back. Microsoft’s System Restore page says it does not affect your personal files, but apps, drivers and updates added after the restore point can be removed.

  1. Open Control Panel, search for Recovery and select Open System Restore.
  2. In the Restore system files and settings box, select Next.
  3. Pick a restore point dated before the problem began. Turn on Show more restore points if you do not see enough choices.
  4. Select Scan for affected programs to see what would be removed, then select Next and Finish. Windows restarts on its own.

When you cannot get to the desktop at all, the same tool is in the recovery screens under Troubleshoot > Advanced options > System Restore. It only helps if restore points were being created, which you can confirm on the list; more detail is in restoring Windows 10 to an earlier date.

If nothing brings your profile back

When nothing above brings the profile back, Microsoft’s answer is to create a new local administrator account, sign in to it, and copy your data across. This leaves the old folder in place, so nothing is lost while you do it. The steps come from Microsoft’s Fix a corrupted user profile page.

Every part of that move, from the backup to retiring the old account, is laid out in replacing a corrupted user profile in Windows 10 and 11.

Create the new administrator account

  1. Open Settings > Accounts and go to the page that lists other users. Microsoft’s current wording is Other user; some Windows 10 PCs show it as Family & other users.
  2. Under Add other user, select Add account, then I don’t have this person’s sign-in information > Add a user without a Microsoft account.
  3. Enter a simple name such as “Test User,” a password and the security questions.
  4. Back on the list, open the new account, select Change account type next to Account options, choose Administrator and select OK.

Microsoft’s Manage user accounts in Windows page has the same steps, and there is a walk-through with screenshots in creating a new user on Windows 10. If the PC already runs Windows 11, follow adding a user to Windows 11 instead.

Copy your files into it

Warning: Microsoft says not to change File Explorer’s view options to show hidden files or protected operating system files while you do this. Copy only what you can see.

  1. Sign out, then sign in to the new account. The first sign-in takes a little longer while Windows sets it up.
  2. Open File Explorer and go to This PC > the Windows drive (usually C:) > Users.
  3. Open your old folder, C:\Users\<old user name>, select all of the files and folders in it and copy them.
  4. Open the new folder, C:\Users\<new user name>, and paste. Large folders take a while.
  5. Restart the PC and sign in as the new user.

Microsoft lists what does not come across on its own. If you use a Microsoft account, switch the new local account to it. Email in a desktop mail program has to be imported again, some apps need to be set up or reinstalled, and Microsoft Store apps may need you to sign in to the Store before your purchases appear.

Keep the old folder until you have used the new account for a while and know nothing is missing. After that, you can clear it out with Windows’ own tool, as described in deleting a user profile in Windows. That removes whatever is still in the old folder, so check your copy first.

On a work or school PC

If your PC belongs to an employer or school, save this session’s work to approved storage and contact the IT team before trying the steps above. Creating local accounts or changing security software may be blocked or against policy, and the organization may manage profiles in ways you cannot see from the PC.

Windows 10 support and Windows 11

In Microsoft’s words, “Windows 10 has reached the end of support on October 14, 2025,” and technical assistance, feature updates and security updates are no longer provided. Your PC still works and all of the steps here still apply, and Microsoft’s Windows 10 end of support page explains the options, including the consumer Extended Security Updates program, which Microsoft says can protect a Windows 10 device until October 12, 2027. On current versions of Windows 11 the message and Microsoft’s fixes are the same.

Temporary profile answers

Are my files gone when I see this message?

Usually not. The temporary profile is a separate, empty profile, so your older files are normally still in your usual folder under C:\Users. What is at risk is anything you create or change in the temporary session, which is why copying it out comes first.

Does a temporary profile mean my PC has a virus?

Not necessarily. Security software scanning at sign-in and damaged files are common triggers. A Microsoft Defender scan is still worth running so you can rule malware out.

Do I have to reinstall Windows?

Rarely. Microsoft’s own route ends with a new account and copied files, not a reinstall. Consider bigger repairs only if the new account shows the same message too, and back up first.

If a forgotten password or a lockout is what is keeping you out rather than this message, see getting a locked user account working again in Windows 10.