If you forgot your Apple Watch Series 3 passcode, you can erase the watch without it in two ways. With the paired iPhone, open the Watch app and go to My Watch > General > Reset > Erase Apple Watch Content and Settings. Without the iPhone, put the watch on its charger, press and hold the side button until the power-off screen appears, then press and hold the Digital Crown until you see Erase all content and settings, and confirm. Either way, Activation Lock stays on, so you’ll still need the Apple Account password to set the watch up again.
Here are both methods, what happens to your data, and what to do if the watch belongs to someone else.
Before you reset
- Erasing deletes everything on the watch, including watch faces, settings, and any music or photos stored on it.
- Your health and activity data is usually backed up to the paired iPhone and iCloud, so it isn’t lost if you set the watch up again with the same iPhone.
- Cellular models may ask whether to keep or remove your cellular plan. Keep it if you’re setting the watch up again yourself.
- Apple Watch Series 3 runs up to watchOS 8, so the steps below match that version.
Method 1: Reset from the paired iPhone
- Keep the watch and iPhone close together.
- Open the Watch app on the iPhone.
- Tap the My Watch tab, then General > Reset.
- Tap Erase Apple Watch Content and Settings, then tap it again to confirm.
- Enter your Apple Account password if asked.
When it finishes, the watch restarts and you can pair it again, restoring from the backup on your iPhone.
Method 2: Reset on the watch without the iPhone
- Place the watch on its charger and keep it there until the reset is done.
- Press and hold the side button until you see the power-off slider.
- Press and hold the Digital Crown until you see Erase all content and settings.
- Tap Reset, then Reset again to confirm.
On older watchOS versions, you may need to press firmly on the power-off slider instead of holding the Digital Crown. The reset can take several minutes.
After the reset: Activation Lock
Erasing a watch doesn’t remove Activation Lock. When you or anyone else sets it up again, the watch asks for the Apple Account email and password that were used with it. This protects stolen watches from being reused.
- If it’s your watch: Pair it with your iPhone and enter your Apple Account password when asked.
- If you’re giving it away: Remove it from your account first. Unpair it in the Watch app, or go to iCloud.com > Find Devices, select the watch, and choose Remove this device.
- If you bought it used and it’s locked: Ask the previous owner to remove it from their account. Apple can’t remove Activation Lock without proof of ownership.
Which method should you use?
| Situation | Best method |
|---|---|
| You have the paired iPhone | Reset from the Watch app |
| No iPhone, forgot the passcode | Reset on the watch while charging |
| Selling or giving the watch away | Unpair in the Watch app (removes Activation Lock too) |
| Watch is stuck or frozen | Force restart first: hold the side button and Digital Crown for at least 10 seconds |
Setting the watch up again
After the reset, open the Watch app on your iPhone and hold the iPhone over the animation on the watch face to pair. Choose Restore from Backup to bring back your faces, settings, and app layout, or Set Up as New for a clean start. You’ll create a new passcode during setup. If the watch prompts for a software update, keep it on the charger and near the iPhone until the update finishes.
If the reset or pairing gets stuck
- The erase option doesn’t appear: Make sure the watch is on its charger and powered on, then try again.
- The watch shows a red exclamation point: This can mean it needs to be restored by Apple. Contact Apple Support.
- It’s stuck on the Apple logo: Leave it on the charger for a while, then force restart.
- Pairing fails after the reset: Restart both devices, update the iPhone, and keep them close together with Bluetooth and Wi-Fi on.
Avoid getting locked out again
Choose a passcode you’ll remember, or turn on Unlock with iPhone in the Watch app under Passcode, so unlocking your phone unlocks the watch when you’re wearing it.
How many wrong passcode attempts are allowed?
After several wrong attempts, the watch makes you wait longer before trying again. If you’ve turned on Erase Data, it erases itself after 10 failed attempts.
Related: How to unpair an Apple Watch.
Related: How to check the watchOS version on an Apple Watch.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.