How to Change the Default Window Size in Windows 11

Resize the window and close it. Windows 11 has no single setting for the default size of every window, and Microsoft doesn’t document one, but most desktop apps reopen at roughly the size they had when you last closed them. For an app you always want big, a classic desktop shortcut can be set to open it maximized. The sections below show what each method controls in current versions of Windows 11.

What actually controls a window’s size

Because there is no global switch, the size a window opens at comes from one of several places.

Method What it controls Best for
Resize and close the app The size that app saves for itself (app behavior, not a Windows setting) Desktop programs that remember their own size
Shortcut set to open maximized How that one shortcut launches the program A program you always want full size
Snap and Snap layouts Where and how big a window is right now (half, third, quarter) Arranging windows quickly after they open
PowerToys FancyZones Custom zones that windows snap into Large or ultrawide monitors and repeatable layouts
Display Scale and resolution How big everything looks, including every window All windows seeming oversized or tiny
App’s own startup settings Launch size inside that app Windows Terminal and apps with a size option

One more thing to rule out: if the problem is an app filling the whole screen with no title bar, that’s full-screen mode rather than window size, and getting out of full screen in Windows covers it.

Resize it, then close it

This is the method that works for the most apps, because many programs save their own window size and position when they close. It’s app behavior rather than a documented Windows feature, so results vary from program to program.

  1. Open the app.
  2. If it fills the screen, select the Restore Down button (two overlapping squares) next to the X in the top-right corner.
  3. Drag an edge or corner until the window is the size you want, and drag the title bar to put it where you want it.
  4. Close the app normally with the X button or the app’s own Exit command.
  5. Open the app again to check that it came back at the new size.

Close the app normally, and if it has several windows open, try closing the extra ones first. Results depend on the app.

Make a shortcut open maximized

Classic desktop shortcuts have a Run option that tells Windows how to open the program: in a normal window, minimized, or maximized. Microsoft’s support pages don’t walk through this setting, so labels may differ slightly, but in current Windows 11 builds it is in the shortcut’s Properties.

  1. Right-click the program’s shortcut on the desktop and select Properties. If you only have a Start menu entry, create a desktop shortcut for the program first; making shortcuts in Windows 11 shows how.
  2. Open the Shortcut tab.
  3. In the Run list, choose Maximized (or Normal window or Minimized).
  4. Select OK, then open the program from that shortcut.
Windows 11 shortcut Properties dialog on the Shortcut tab with the Run dropdown set to Maximized
(1) Open the Shortcut tab, then (2) set Run to Maximized. (Illustration)

The setting only applies when you launch the program from that shortcut, and some programs ignore it because they restore their own saved size instead. Apps from the Microsoft Store generally don’t offer this option at all. Maximized still keeps the title bar and taskbar visible; for edge-to-edge viewing, see making apps full screen on Windows 11.

Snap a window to a set share of the screen

Snap doesn’t set a default, but it gives you exact, repeatable sizes in a second. Microsoft’s Snap your windows page covers these controls:

  • Snap layouts: hover over a window’s maximize or restore button, or press Windows key + Z, and pick a zone in one of the layouts.
  • Drag: drag a window to the left or right edge to fill that half, to a corner for a quarter, or to the top of the screen to open the Snap bar.
  • Keyboard: Windows logo key + arrow snaps the active window. Microsoft’s keyboard shortcut list adds that Windows key + Up arrow maximizes the active window and Windows key + Down arrow restores a snapped or maximized one.

If those controls don’t respond, go to Settings > System > Multitasking and turn on Snap windows. Expanding it shows Microsoft’s options, including “Show snap layouts when I hover over a window’s maximize button” and “When I drag a window, let me snap it without dragging all the way to the screen edge.” For working with two apps at once, opening two windows side by side and splitting the screen in Windows 11 go further.

PowerToys FancyZones for repeatable layouts

FancyZones is part of Microsoft PowerToys, a free set of utilities from Microsoft. It lets you draw your own zones, such as a wide center column with two narrow side columns, and then drop windows into them so they always land at the same size. Microsoft’s FancyZones documentation describes how it works:

  1. Install PowerToys from the Microsoft Store or from Microsoft’s GitHub release, as described on Microsoft’s PowerToys install page.
  2. Open the layout editor with Open layout editor in PowerToys or press Win + Shift + ` (the back-tick key).
  3. Pick a template or make a custom Grid or Canvas layout, then apply it.
  4. Hold Shift while you drag a window to see the zones, and release over the one you want.

The option Move newly created windows to the last known zone is the closest FancyZones gets to a default size: a window that was in a zone goes back to it when it opens again. Microsoft doesn’t describe FancyZones as setting the size an app opens at, so treat it as a fast way to place windows rather than a true default.

When every window looks too big or too small

If the problem is every window, not one app, display settings are the likelier cause. Microsoft’s page on changing screen resolution and layout gives the path:

  1. Select Start > Settings > System > Display.
  2. Under Scale & layout, open Scale. Microsoft says it’s usually best to choose the value marked (Recommended); a lower percentage fits more on screen.
  3. Check Display resolution, which Microsoft also suggests leaving at the value marked (Recommended).

Scaling changes text and controls everywhere, so it’s the right fix when everything feels cramped or oversized. More detail is in changing display scaling in Windows 11.

Apps with their own launch size

A few apps let you set the startup size directly. Windows Terminal is the clearest example: Microsoft’s Terminal startup settings include Launch size (columns and rows, 120 by 30 by default) and Launch mode (default, maximized, full screen, focus or maximized focus). Launch size is ignored when Launch mode is maximized. Other apps may hide a similar option in their own settings, so check there before reaching for a workaround.

Windows that forget their size or land off-screen

  • After unplugging a monitor: go to Settings > System > Display, expand Multiple displays, and turn on Remember window locations based on monitor connection. The same section has Minimize windows when a monitor is disconnected. To control which screen a program uses, see making a program open on a specific monitor.
  • A window opens partly off-screen: select it on the taskbar, then press Windows key + Left arrow or Right arrow to snap it back into view, and resize it from there.
  • An app keeps reopening small: resize it, close any second window of the same app first, and close it normally. If it still forgets, the app probably doesn’t save its size.
  • Too many windows in the way: clear the desktop with the shortcuts in minimizing all windows at once, then size the one you need.

Window size questions

Is there a registry value for the default size of all windows?

No single value controls every window. Each app stores its own size its own way, and editing those entries risks breaking the app, so resizing and closing it is the safer route.

Does Snap remember the size next time I open the app?

Not on its own. Snap arranges windows that are already open. Microsoft describes snap groups, which you can return to from the taskbar, Task View or Alt + Tab while the apps are still open.

Why does a maximized app still not fill the screen?

Maximized leaves the taskbar and title bar showing. For a true edge-to-edge view, use the app’s full-screen mode; going full screen on Windows lists the keys for common apps.