Adjust the paper from Layout > Size and pick A4: the page changes to 21 x 29.7 cm at once and the text reflows to fit. If every new file you create still opens as Letter, change the default too, through More Paper Sizes and Set As Default, so you stop fixing it document by document. These steps are for desktop Word for Microsoft 365 on Windows; Mac and web notes follow.
A4 and Letter at a glance
| Size | Metric | Inches | Where it’s standard |
|---|---|---|---|
| A4 | 210 x 297 mm (21 x 29.7 cm) | 8.27 x 11.69 in | Most of the world (ISO 216) |
| Letter | 215.9 x 279.4 mm | 8.5 x 11 in | United States and Canada |
A4 is about 6 mm narrower and 18 mm taller than Letter. The difference looks small, but it is enough to push the last line of a page onto the next one, or to make a fixed-width table stick out past the right margin. New blank documents use the size stored in Word’s Normal template, so if yours opens as Letter, change the default as shown below.
Switch the open document to A4
- Select the Layout tab. In older versions of Word it is called Page Layout.
- Select Size in the Page Setup group.
- Choose A4 from the list.
Word applies the size to the whole document unless it has more than one section. Scroll through afterward and check page breaks, tables and pictures. To see which size a document uses right now, open Layout > Size again: the current size is highlighted.
Make A4 the default for every new document
Changing the size of one file doesn’t change the next blank document. To fix that at the source:
- On the Layout tab, select Size > More Paper Sizes. The Page Setup dialog opens.
- Go to the Paper tab and select A4 under Paper size.
- Check that Apply to says Whole document.
- Select Set As Default at the bottom left.
- Word asks you to confirm that the change applies to new documents based on the Normal template. Select Yes.
From now on, File > New > Blank document starts at A4. Two things stay as they were: files you already saved, which keep their own size, and documents made from other templates (a resume or newsletter template, for example), which use whatever size that template stores. The same Set As Default idea saves your margins; setting exact 1-inch margins in Word shows it for a common case.
If A4 isn’t in the Size list
The list under Size can vary with the printer Word is set to use, so a printer that can’t take A4 may leave it out. You have three options:
- Type it in. Open Size > More Paper Sizes and, on the Paper tab, enter Width 21 cm and Height 29.7 cm (or 8.27″ and 11.69″). Word may label the result Custom size, but the page is A4.
- Pick a different printer. In File > Print, choose a printer that does handle A4 and then look at the Size list again.
- Use the built-in PDF printer. If you’re making a PDF to send rather than printing, choosing Microsoft Print to PDF as the printer may bring A4 back to the list.
Never install a printer driver from a download site to get a paper size. If you need a newer driver, get it from the printer maker’s own support page.
Use A4 for only part of a document
A report might need Letter for the body and an A4 appendix for a form that has to match an overseas original. Word handles that with sections:
- Click where the A4 pages should start and go to Layout > Breaks > Next Page, the section break Microsoft uses in its single-page header steps.
- Click inside the new section.
- Open Size > More Paper Sizes, choose A4 on the Paper tab, and set Apply to as This section.
- Select OK, then repeat with Letter after another section break if the document returns to Letter later.
More on breaks is in creating sections in Word, and the same approach gives one page its own margins, as in using different margins on different pages.
Print an A4 file on Letter paper, or the reverse
When the document is A4 but the tray holds Letter, the bottom of each page can be cut off or the margins can look uneven. Two ways to deal with it:
- Change the document. If you can, switch the file to Letter for your own printout and back to A4 before sending it.
- Scale the printout. In File > Print, look in the per-page setting (it usually reads 1 Page Per Sheet) for a Scale to Paper Size option and choose the paper in your tray. Word shrinks or enlarges each page to fit without changing the document.
If you want text close to the edge, keep in mind that most desktop printers can’t print to the very edge of any paper size; printing without margins in Word explains what is possible.
Word for Mac and Word for the web
Word for Mac also has Layout > Size with A4 in the list. For defaults, Microsoft’s default settings page for Word for Mac uses the Format menu: select Document, make your changes, then select Default. That page shows it for margins and layout; the paper size itself is set through Page Setup, and the exact buttons may differ between Mac versions.
In Word for the web, the Layout tab also has a Size menu for the open document. Microsoft doesn’t document a way to change the default paper size for new documents in the browser, so set the default in desktop Word if you have it.
Why new documents keep opening as Letter
- Set As Default wasn’t saved. If you selected No at the Normal template prompt, repeat the steps and select Yes.
- A template has its own size. Documents from other templates ignore the Normal template. Change the size in that template, or set A4 in each document you make from it.
- The file came from someone else. A document always opens at the size it was saved with, whatever your default is.
- The Normal template is shared or managed. On a work PC, the Normal template may be managed by your organization; ask your IT team.
Excel, Google Docs and Word each keep their own setting. For the others, see printing an Excel sheet in A4 size and changing the page size in Google Docs.
A4 page questions
Does setting A4 as the default change documents I already have?
No. Set As Default only affects new documents based on the Normal template. Open each older file and switch it with Layout > Size if it needs to be A4.
Do my margins change when I switch to A4?
The margin values stay the same, such as 1 inch on each side, but because the page is narrower the line of text gets a little shorter. Check Layout > Margins if a school or client specifies the text area.
A table runs past the margin after switching. How do I fix it?
The table probably has a fixed width set for Letter. Click inside it, then on the table’s Layout tab choose AutoFit and the option that fits the table to the window, or drag the right edge back inside the margin.
How do I set a size other than A4 or Letter?
Legal, A5, envelopes and custom sizes all use the same Size menu. Changing paper size in Word covers the full list. Microsoft’s booklet instructions also use the Paper tab’s Paper size box if you’re laying out a folded A4 booklet.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.