Firmware setup has two ways out: save your changes or leave them behind, and the PC restarts either way. Save only if you changed something on purpose; if you were just looking or are unsure, leave without saving.
You leave from the setup screen’s Exit menu or the save-and-exit option your PC maker lists: on a Microsoft Surface it is Exit > Restart now, and on current Dell PCs Apply Changes saves and Exit restarts. Labels differ by maker.
Save or discard: decide before you leave
Settings in the BIOS (on current Windows 11 PCs this is UEFI firmware, and Microsoft calls the menu UEFI Firmware Settings) control how the PC starts. Before you leave, decide which of these describes you.
| Your situation | Which way out | What to expect |
|---|---|---|
| You changed a setting on purpose, following instructions from your PC maker or Microsoft | Save and exit | The change takes effect, and the PC restarts |
| You opened setup to look at something and changed nothing | Exit without saving (or plain Exit on PCs that only save when you apply changes) | The PC restarts with the same settings it had before |
| You pressed keys you are not sure about | Exit without saving | Anything you changed by accident is left behind |
| Your PC maker’s support told you to change a specific setting | Follow that maker’s instructions to the end, including how they say to save | The result the maker describes |
If the setting you changed came from another article, such as the steps to turn off the Acer Predator boot sound and animation, finish by saving, or the change is lost when the PC restarts.
Save your changes and exit
Use whatever your setup screen accepts to move around (on older Dell models, for example, Dell says the arrow keys move and Enter selects). The general pattern:
- Move to the menu or tab named Exit, or to the section your maker uses for saving (the table below has the labels makers print).
- Choose the option that saves, for example Exit > Restart now on a Microsoft Surface, or Apply Changes on a current Dell.
- Confirm if the screen asks you to.
- Let the PC restart. Do not press setup keys again while it starts, or you will land back in setup.
Some firmware setup screens also list a single key that saves and exits. That key is not the same on every PC, so use the one your own setup screen or your maker’s manual shows rather than a key from another brand.
Exit and discard your changes
Microsoft does not describe a discard option for Windows PCs in general; it is up to each PC maker. On many PCs the Exit menu has a separate choice for leaving without saving. Look for wording that says changes will be discarded or ignored, and read any confirmation box before you accept it.
Dell’s current System Setup works the other way around: according to Dell’s guide to UEFI BIOS System Setup, “Apply Changes saves what you have adjusted. Exit leaves the setup screen and restarts the computer.” So on those Dell PCs, choosing Exit without first choosing Apply Changes is the way to leave without saving.
If you cannot find a discard option and you are unsure about what changed, check your PC maker’s manual for that model before choosing anything that saves.
Exit labels by PC maker
These are the exit routes the makers’ own support pages describe. Models vary, so treat your own setup screen and your model’s manual as the final word.
| PC maker | What the maker documents | Where to read more |
|---|---|---|
| Microsoft Surface | “Select Exit > Restart now to save your changes and restart your Surface.” | How to use Surface UEFI |
| Dell (current System Setup) | Apply Changes saves; Exit leaves setup and restarts. Older Dell models use a blue text screen where you move with the arrow keys, select with Enter and go back with Esc. | Dell’s System Setup guide (linked above); entering the BIOS on a Dell computer |
| Lenovo | Exit labels differ by model family; use the Exit menu or the save-and-exit key in your model’s user guide | entering the BIOS on a Lenovo laptop |
| ASUS | Exit labels differ between ASUS’s setup screens; use the save-and-exit option your model’s manual names | Your PC maker’s support site, searched by model number |
| HP, Acer and other makers | Use the Exit menu or the save-and-exit key in your model’s manual; labels and keys are model-specific | Your PC maker’s support site, searched by model number |
What the PC does after setup closes
Whichever way you leave, the PC restarts. On a Surface, Microsoft says that after Exit > Restart now the device saves the change and starts Windows. On other PCs you should see the maker’s logo, then the Windows 11 sign-in screen.
One thing can interrupt that: a BitLocker recovery screen. Microsoft’s BitLocker recovery overview lists firmware-related changes among the common causes, including “Having the CD or DVD drive before the hard drive in the BIOS boot order” and “Turning off, disabling, deactivating, or clearing the TPM.” Microsoft does not say that opening setup and leaving without changes causes a recovery prompt. Dell’s System Setup guide says that, on its PCs, “Simply looking around in BIOS setup and exiting without saving does not trigger BitLocker.”
If the recovery screen appears, enter your recovery key. Microsoft’s page on finding your BitLocker recovery key lists where it may be stored, such as your Microsoft account, a work or school account, a printout or a USB drive, and warns that “Microsoft Support doesn’t have the ability to retrieve, provide, or recreate a lost BitLocker recovery key.” For more places to look, see what to do when you can’t find your BitLocker recovery key.
If setup opens again on its own
When the PC keeps returning to firmware setup instead of loading Windows, check the boot device the way your PC maker documents it (ASUS, for example, has a troubleshooting page for devices that boot directly into BIOS, which points to the drive Windows is installed on), and unplug any USB drive or disc you left connected. If Windows still does not load, contact your PC maker’s support rather than changing other settings to see what happens.
Getting back into setup later
You do not need to catch a key at startup to return. Microsoft’s Secure Boot enablement guide prints the route on current versions of Windows 11:
- Open Settings and select System > Recovery.
- Next to Advanced startup, select Restart now.
- On the Choose an option screen, select Troubleshoot > Advanced options.
- Select UEFI Firmware Settings, and then select Restart.
Other entry methods are covered in four ways to open the BIOS in Windows 11. On an older PC still running Windows 10, see entering the BIOS on Windows 10, and keep in mind Microsoft’s notice that Windows 10 has reached the end of support on October 14, 2025.
Leaving BIOS setup: questions
Is F10 always the key that saves and exits?
No. Keys and labels are set by each PC maker and can change between models. Dell’s current setup, for example, uses Apply Changes and Exit instead of a single save key, and a Surface uses Exit > Restart now. Use the key or menu your own screen or manual shows.
Can I just turn the PC off to get out of setup?
None of the maker pages above describe that as a way to leave. Use the Exit menu so you choose whether changes are kept. If setup stops responding to the keyboard, contact your PC maker’s support for that model.
Is UEFI setup the same thing as the BIOS?
People use both names for the same screen. Windows 11 PCs use UEFI firmware, which is why the Windows menu says UEFI Firmware Settings, while many makers still call their setup screen the BIOS.
Where should I keep my BitLocker recovery key?
Somewhere you can reach without this PC: Microsoft lists your Microsoft account, a printout and a USB drive among the usual places. Check you can find it before you change firmware settings.
Next time you open setup, note what you plan to change before you start. That makes the choice at the exit screen simple: save if you made that change, discard if you didn’t.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.