How to Add or Delete a Text Box in PowerPoint

PowerPoint text boxes are added from the Insert tab and removed by selecting the box border rather than the text inside it: choose Insert > Text Box, drag on the slide, and type; to delete one, click its border and press Delete. Placeholders, the “Click to add text” boxes that come with a slide layout, behave differently, so it helps to know which kind of box you are looking at before you remove it.

Is it a text box or a placeholder?

Microsoft describes text boxes as a way to place text anywhere on a slide, “such as outside a text placeholder.” Placeholders are part of the slide layout: they show prompt text that disappears when you start typing, and Microsoft’s example shows a placeholder as a dotted border. Use this table to work out what you have and how to get rid of it.

What you see Where it came from How to remove it
A box you drew yourself Insert > Text Box Click the border, press Delete
“Click to add title” or “Click to add text” The slide layout Switch the slide’s layout, or edit the layout in Slide Master view
A box you can’t select on any slide The Slide Master View > Slide Master, then delete it there

Add a text box with the mouse or the keyboard

  1. Open the slide that should get the new box.
  2. On the ribbon, select the Insert tab. In the Text group, select Text Box.
  3. Click and drag on the slide to draw the box in the position and size you want.
  4. Type or paste your text, then click outside the box to finish.
PowerPoint Insert tab with the Text Box button highlighted
(1) Open the Insert tab, then (2) click Text Box and draw it on the slide. (Illustration)

If you’d rather keep your hands on the keyboard, Microsoft documents two routes on Windows. Its add, copy, or delete a text box page says to press Alt+N to go to the Insert tab, use the arrow keys to move to the Text Box button, and press Ctrl+Enter to add the box to the slide. The PowerPoint keyboard shortcuts list also gives Alt+N, X as the key sequence for inserting a text box.

PowerPoint for Mac has the same Text Box command; Microsoft’s Mac instructions have you click the spot on the slide where the box should go and then type. If you use East Asian language settings, the Text Box drop-down also offers horizontal or vertical alignment, according to Microsoft’s add text to a slide article.

Delete a text box without deleting only its words

The most common mistake is clicking inside the box and pressing Delete, which removes characters one at a time and leaves an empty box behind. Microsoft’s note is direct: if the pointer is inside the box, pressing Delete deletes the text inside it, not the box.

  1. Click the border of the text box you want to remove, not the text inside it.
  2. Press Delete.

Already clicked into the text? Press Esc. Microsoft’s shortcut list describes Esc as the way to select an object when the text inside it is selected, so the whole box is then ready to delete.

To clear several boxes at once, press Ctrl+A to select all objects on the slide, or use the Selection pane (covered below) and Ctrl+click each item you want. If something disappears that you meant to keep, press Ctrl+Z to undo the last action.

Remove a placeholder or a box that keeps coming back

When a layout gives you a placeholder you don’t need, the cleaner fix is usually at the layout level rather than slide by slide.

A text box added in Slide Master view is a different case. Microsoft says text you add there “will become permanent and un-editable outside the Slide Master,” which is why a box can appear on every slide and refuse to be selected in Normal view. To remove a placeholder from a layout, Microsoft’s placeholder article gives these steps:

  1. On the View tab, select Slide Master.
  2. In the left thumbnail pane, select the slide layout you want to revise.
  3. Select the placeholder on the layout, then press Delete.

When you finish, close Master view to return to your slides.

Two cautions from the same source: Microsoft recommends that you don’t remove placeholders from the pre-built layouts, and placeholders can only be added to slide layouts, not individual slides. If you do want a change like that, Microsoft suggests duplicating the layout, giving it a distinct name, and editing the copy. A safer move is often to pick a layout that doesn’t have the placeholder you dislike, from the Layout menu on the Home tab.

If layout tweaks went wrong, Home > Reset reverts the slide to its original layout, and Microsoft notes that Reset doesn’t delete content you’ve added. Microsoft doesn’t say whether Reset restores a placeholder you deleted, so check the slide afterward.

Copy, move, and format a text box

  • Copy the whole box: Click its border, press Ctrl+C, select the destination slide, and press Ctrl+V. With the pointer inside the box, Ctrl+C copies only the text.
  • Move it: Click the box, and when the pointer becomes a four-headed arrow, drag it to the new spot. To resize it, drag a sizing handle on its border. Guides help line several boxes up, as explained in turning on guides in PowerPoint.
  • Format the text: Select the words, then use the options in the Font group on the Home tab. For tighter or looser lines, see changing line spacing in a PowerPoint text box.
  • Control how text fits: Right-click the edge of the box, select Format Shape, open Size & Properties, and under Text Box choose between options such as Resize shape to fit text and Shrink text on overflow.
  • Add a border or fill: Microsoft notes that you can add a border, fill, shadow, or 3-D effect to text in a text box, and change or remove a text box border.

A text box can also become something more visual. A short list inside one is a good starting point to convert the text box to SmartArt, and a styled title may suit WordArt in PowerPoint better than a plain box. For a graphic built from words, see making a word cloud in PowerPoint.

Turn the text sideways or stack it

Vertical text belongs in the same Format Shape pane. Microsoft’s text direction article gives this route:

  1. Right-click the edge of the text box.
  2. Select Format Shape.
  3. In the Format Shape pane, select Size & Properties.
  4. Under Text Box, pick an option in the Text direction list.

The list rotates text 90 or 270 degrees, and the Stacked option, which places letters one above another, is available in PowerPoint and Excel but not in Word.

Find a text box you can’t click

Boxes hide behind pictures, sit under other boxes, or end up partly off the slide. The Selection pane lists every object so you can pick one without hunting with the mouse. Open it from Home > Select > Selection Pane in the Editing group, or press Alt+F10, as Microsoft’s Selection pane guide describes.

  • Click a name in the list to select that object on the slide, then press Delete.
  • Use Ctrl+click to select several entries at once.
  • Hide an object instead of deleting it: it stays in the file but is no longer visible.
  • Reorder entries to bring a buried box to the front.

If the box doesn’t appear in the list and still can’t be selected, check the Slide Master with the steps above.

A good habit before any cleanup: open the Selection pane first, so you can see exactly which boxes you are about to delete.

PowerPoint text box questions

Why does PowerPoint shrink my text as I type?

That happens in placeholders. Microsoft says that if your text exceeds the size of the placeholder, PowerPoint reduces the font size and line spacing incrementally to make it fit. In a text box you control this yourself with the fit options in Format Shape.

What if I want to remove the whole slide, not one box?

Deleting slides works differently, from the thumbnail pane, and is covered in deleting a slide in PowerPoint.