To single space in Word, select the text and press Ctrl+1, then make sure no extra space is added after each paragraph. The surest route is Home > Line and Paragraph Spacing > Line Spacing Options, where you set Line spacing to Single and After to 0 pt in one dialog. Select Set as Default there and every new document starts single spaced too.
Single-space text in the Paragraph dialog
Word’s Paragraph dialog sets both parts of single spacing at once: the line spacing inside each paragraph and the paragraph spacing after it. These steps are for Word for Microsoft 365 on Windows, and they also match Word 2024, 2021, 2019 and 2016. Mac and web differences are near the end.
- Select the paragraphs you want to change, or press Ctrl+A to select the whole document.
- Go to Home > Line and Paragraph Spacing > Line Spacing Options.
- In the Line spacing box, choose Single.
- Under Spacing, set After to 0 pt, and Before to 0 pt as well if you don’t want space above paragraphs.
- Select OK.
Step 4 is the one people miss. Microsoft’s own pages give the starting point in Word for Microsoft 365: “the default is 1.15 lines, with 10 points of space after each paragraph.” Single spacing changes both numbers:
| Setting | Word’s default | True single spacing |
|---|---|---|
| Line spacing | 1.15 | 1.0 (called Single in the Paragraph dialog) |
| Space after each paragraph | 10 pt | 0 pt |
| Space before each paragraph | Headings have space above them | 0 pt |
If you want a different value, such as 1.5 or an exact point size, see how to adjust line spacing in Word.
When the paragraph spacing is already at 0 pt, or you only need tighter lines, the faster routes are enough:
- Keyboard: select the paragraphs and press Ctrl+1, which Microsoft’s Word keyboard shortcuts list describes as “Apply single spacing to the paragraph.”
- Ribbon: select the paragraphs, go to Home > Line and Paragraph Spacing (the button with lines and up and down arrows in the Paragraph group), and choose 1.0.
Line spacing always applies to whole paragraphs, so you don’t need to select every character; placing the cursor in one paragraph is enough for that paragraph. Both routes change line spacing only. If the 10 pt gap after each paragraph is still there, set After to 0 pt in Line Spacing Options as described above.
Keep single spacing for new documents
Everything above changes the document you have open. To make every new blank document start single spaced, save the settings to the Normal template. Microsoft’s change the default line spacing page gives this route:
- Go to Home > Line and Paragraph Spacing > Line Spacing Options.
- Set Line spacing to Single and Before and After to 0 pt.
- Select Set as Default.
- Choose All documents based on the Normal template, then select OK.
There’s also a route through the Design tab. On its set single space as the default page, Microsoft says to go to Design > Paragraph Spacing > Custom Paragraph Spacing, open the Set Defaults tab, choose Single for Line Spacing in the Paragraph Spacing section, select New documents based on this template, and then select OK.
Either way, the change applies to new documents based on the Normal template. Documents you’ve already saved keep their own spacing, so use the steps above on those. A new default font works the same way; see how to set Times New Roman as the default font in Word if you want to change both at the same time.
Single-space a whole document in one click
The Design tab has a preset that removes the extra line spacing and the paragraph gaps for the entire document, without selecting anything first.
- Click at the top of the document.
- Go to Design > Paragraph Spacing.
- Choose No Paragraph Space.
Microsoft notes that this “overrides the settings of the style set you’re currently using,” so it affects every paragraph that uses the document’s styles. To go back, open Design > Paragraph Spacing again and select Default or the name of the style set you were using. Microsoft documents both routes on its single-space the lines in a document page.
The preset suits a document that uses Word’s built-in styles throughout. If a few paragraphs were formatted by hand and still look different, select them and use Line Spacing Options.
If the text still doesn’t look single spaced
Word spaces text in two separate ways: line spacing is the distance between the lines inside one paragraph, and paragraph spacing is the gap Word adds before or after a paragraph each time you press Enter. When you’ve chosen 1.0 and the page still looks airy, one of these is usually the reason:
- Space after paragraphs is still on. Check the After box in Line Spacing Options and set it to 0 pt.
- The style set adds spacing. Built-in style sets on the Design tab carry their own paragraph spacing. Choosing No Paragraph Space under Design > Paragraph Spacing overrides it.
- Line spacing is set to At least or Exactly. These options use a point value instead of a multiple. Microsoft explains that At least sets a minimum that Word can raise for larger text, while Exactly keeps every line at the same fixed height. If the box shows either one, switch it to Single.
- There are empty paragraphs. Pressing Enter twice between paragraphs creates blank lines that no spacing setting removes. Press Ctrl+Shift+8 to display all nonprinting characters; each ¶ mark on an otherwise empty line is an extra paragraph you can delete.
For more stubborn gaps, the fixes for how to remove space between lines in Word cover line breaks and pasted formatting, and the steps to remove extra space in Word handle stray spaces and blank lines. A large gap between the bottom of one page and the top of the next is a view setting rather than spacing; see how to hide white space between pages in Word.
Single spacing on a Mac or in a browser
Word for Mac uses the same Home > Line and Paragraph Spacing > 1.0 button and the same Design > Paragraph Spacing > No Paragraph Space preset. Press Command+A to select everything and Command+1 to apply single spacing. To make it the default, Microsoft says to choose No Paragraph Space and then go to Design > Set as Default and select Yes; note that this also saves the current style set and theme as the default.
Word for the web works on the open document only. Select the paragraphs, go to Home > Paragraph > Line Spacing, and choose 1.0; Line Spacing Options sits lower in the same list if you also need to set the After value. Microsoft states that “Word for the web does not have a way to change the default,” so new documents created there start at 1.15 again. To change the default, open the file in the desktop app and use the steps above.
Single spacing questions
Is 1.0 in the menu the same as Single in the Paragraph dialog?
Yes. Microsoft uses 1.0 on the Line and Paragraph Spacing menu and Single in the dialog’s Line spacing box for the same single-spaced lines. Neither one changes the space after paragraphs on its own.
Which keyboard shortcuts switch between spacing values?
On Windows, Ctrl+1 applies single spacing, Ctrl+5 applies 1.5-line spacing, and Ctrl+2 applies double spacing. For papers that need the opposite of this article, see how to double space in Word.
Will setting single spacing as the default change my old documents?
No. Microsoft’s wording is “All documents based on the Normal template” and “New documents based on this template,” which covers documents you create from now on. Open older files and apply Single and 0 pt to them directly.
For a quick check after any of these changes, press Ctrl+Shift+8, look for empty ¶ lines, and open Line Spacing Options on a body paragraph: Single with 0 pt before and after means the document is truly single spaced.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.