To give every column in a Word table the same width, select the table (or just the columns you want to match) and choose Distribute Columns in the Cell Size group of the Table Layout tab. Word shares the selected columns’ total width out evenly. If your “columns” are newsletter-style text columns rather than a table, that’s a different setting: Layout > Columns > More Columns with Equal column width checked, covered further down.
Table columns or page columns?
Word uses the word “column” for two unrelated things, and most confusion about this task starts there. Table columns are the vertical strips of cells inside a grid you inserted. Page columns split the text itself into side-by-side strips, like a newsletter or a brochure, with no cell borders. A quick test: click in the area. If the Table Design and Table Layout tabs appear on the ribbon, you’re in a table.
Once you know which one you have, this table points you to the right command. The steps are for current Word for Microsoft 365 on Windows (Word 2016 through 2024 use the same labels); Mac and web differences have their own section.
| What you want | Command | Where it is |
|---|---|---|
| Table columns all the same width, quickly | Distribute Columns | Table Layout > Cell Size |
| Table columns at one exact measurement | Table Column Width box | Table Layout > Cell Size |
| Table columns as a share of the table width | Preferred width, measured in percent | Table Properties > Column tab |
| Equal widths that don’t drift as you type | AutoFit > Fixed Column Width | Table Layout > Cell Size |
| Equal text (newsletter) columns | Equal column width | Layout > Columns > More Columns |
Even out table columns with Distribute Columns
Microsoft’s page on resizing a table column or row documents this as the way to make several columns the same size.
- Choose what to even out. For the whole table, point at the table and click the small square move handle that appears at its top-left corner; that selects everything. For particular columns, click a column’s top gridline or border to select it, then drag across to the neighboring columns.
- To pick columns that aren’t next to each other, hold Ctrl while you select them.
- Open the Table Layout tab. (Older versions show it as Layout under Table Tools.)
- In the Cell Size group, select Distribute Columns.

Expect the overall table width to stay roughly where it was: the command rearranges the space the selected columns already take up rather than widening the table. Say a sign-up sheet has a wide Name column and three narrow date columns. Select only the three date columns and distribute them, and the Name column keeps its width while the dates become identical. Select all four and the Name column shrinks to match the others.
The button next to it, Distribute Rows, does the same for row heights if you want a grid of identical cells.
Give every column the same exact width
Distribute Columns gives you equal widths, but not a width you chose. When the columns must measure, say, 1.5 inches each (to line up with a printed form or a second table), type the number yourself.
- Select the columns, or the whole table.
- On Table Layout, in the Cell Size group, click in the Table Column Width box.
- Type the width (for example, 1.5″) and press Enter.
To work in percentages instead, use the dialog box that Microsoft describes on its table properties page:
- Right-click the table and choose Table Properties, then open the Column tab.
- Under Size, select Preferred width and enter a value.
- In the Measure in box, choose inches or percent. Four columns at 25% each, for example, split the table into equal quarters.
- Use Previous Column and Next Column to move through the columns without closing the dialog, then select OK.
Dragging a border on the ruler also works for fine tuning. Hold Alt while you drag and Word shows the exact measurements, which helps you match columns by eye.
Keep the columns equal while you type
By default a Word table can grow its columns to fit what you type or paste, so a long word in one cell can undo your neat, even layout. To stop that, click in the table, select AutoFit in the Cell Size group, and choose Fixed Column Width. The other two AutoFit choices behave differently: AutoFit Contents sizes each column to its text (the opposite of equal), and AutoFit Window stretches the table to the page margins, after which you can distribute again. If the table is too big overall rather than uneven, see how to shrink a table in Word.
For text set in page columns, the equal-width setting lives in the Columns dialog, as Microsoft explains in adjusting column widths on a page.
- Click anywhere in the text that’s in columns.
- On the Layout tab (Page Layout in some older versions), select Columns, then choose More Columns at the bottom of the list.
- Check Equal column width. Clearing that box is how you’d get columns of different widths.
- Adjust the settings under Width and spacing if you want more or less gap between the columns, then select OK.
The same dialog has a Line between option that draws a rule down the gutter; there’s more on that in adding lines between columns in Word. If you’re choosing between page columns and a two-column table for a layout, dividing a Word page into two halves compares the options.
Columns still uneven? Quick fixes
- Distribute Columns can’t be selected. The cursor isn’t inside a table, so the table tabs aren’t active. Click in a cell first.
- Only part of the table changed. Word evens out what you selected. Select the whole table with the move handle and try again.
- One column still looks different. Merged or split cells can leave some rows with a different grid from the others, so their borders don’t line up. Check for merged cells in that area; unmerging them, or applying the width to each affected row, usually helps.
- The widths keep changing. Switch AutoFit to Fixed Column Width, as described above, before adding more text.
- The table hangs past the margin. Choose AutoFit > AutoFit Window, then distribute again. More causes are covered in how to fix a Word table that is off the page.
- You need another column first. Add it (see adding columns to a table in Word), then distribute so the new column matches.
Mac and Word for the web differences
In Word for Mac, Microsoft’s Mac table resizing page says two contextual tabs, Table Design and Layout, appear when you click in a table. Select the columns, then choose Distribute Columns on the Layout tab; the same tab has boxes for an exact height and width.
For Word for the web, Microsoft says you can see newsletter-style columns but can’t create or resize them in the browser; it points you to the Open in Word command (or Edit Document > Edit in Word) to use the desktop app. Microsoft doesn’t list Distribute Columns for tables in Word for the web, so if you don’t see it there, open the file in desktop Word, even out the columns, and save. The widths stay with the document.
Column width questions
Can I make only two of the columns equal?
Yes. Select just those two (use Ctrl if they aren’t side by side) and choose Distribute Columns. The other columns aren’t touched.
How do I make the rows the same height too?
Select the rows and choose Distribute Rows, next to Distribute Columns. For a fixed number, type it in the Table Row Height box in the same group.
Will equal columns stay put when I add a header row that repeats?
Repeating the header row is a separate row setting and doesn’t change the column widths you set. It’s explained in how to repeat table header rows in Word.
For borders, styles, merging and other changes once the widths are right, see how to edit a table in Word.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.