High performance is one of the power plans Windows 11 can list in Power Options, but many PCs show only Balanced and use the Power mode setting instead. Which one you have depends on the hardware: Microsoft says devices that support Modern Standby only allow Balanced or plans built from it. If High performance is listed, select it; if not, Best performance in Power mode is the Microsoft-documented alternative, and powercfg can add the plan on some PCs.
What do you see in Power Options?
Open Control Panel, go to System and Security > Power Options, and compare the plan list with this table. The path is the one Microsoft’s power mode help page uses.
| What the list shows | What it means | Go to |
|---|---|---|
| High performance is listed | The plan exists and only needs selecting | Switch to High performance |
| Balanced plus a collapsed section of extra plans | High performance may be hidden in that section | Switch to High performance (expand the section first) |
| Only Balanced, nothing else | Often a Modern Standby PC, which Microsoft limits to Balanced | Best performance in Power mode, or try powercfg |
| A custom plan is selected and Power mode is grayed out in Settings | Microsoft says a custom plan can block Power mode | Select Balanced, then use Power mode |
Microsoft describes High performance as a plan that “delivers maximum performance at the expense of higher power consumption,” per its power policy settings page. It is a trade, not a free speed boost, which matters most on a laptop.
Switch to High performance
- Open Control Panel (search for it from Start) and select System and Security > Power Options.
- If you see only one or two plans and a collapsed section below them, expand it.
- Select the High performance option button.
- Close Control Panel.
Each plan also has its own settings for screen and sleep timeouts. If you only want the PC to stay awake, changing those inside your current plan is gentler than switching plans; see how to stop your computer from sleeping in Windows 11. For one specific setting such as USB selective suspend, changing USB power settings covers the advanced options.
Check the plan with powercfg
The powercfg command shows exactly which plans Windows has, with no guessing about hidden sections. Microsoft documents every switch used here on its powercfg command-line options page.
- Open Terminal or Command Prompt as an administrator (search for it from Start, then choose the run-as-administrator option). Microsoft’s page only requires an elevated window for some switches, but an administrator window avoids permission errors for system-wide changes.
- Type
powercfg /listand press Enter. Windows lists every power scheme with its GUID (a long identifier) and name. - To confirm what is active right now, run
powercfg /getactivescheme.
If High performance appears in the list, make it active with its GUID:
powercfg /setactive 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
That GUID is the one Microsoft lists for the High Performance plan. If your list shows a different GUID next to the High performance name, use the one from your own list, since Microsoft says the GUID for /setactive comes from powercfg /list.
High performance is not listed at all
Microsoft’s power policy page states it plainly: devices that support Modern Standby mode only allow the Balanced power plan, or power plans derived from Balanced. Modern Standby is a low-power sleep model that depends on the PC’s hardware. On those PCs, an empty list is expected behavior, not a fault, and Microsoft documents no setting that brings the classic plan back.
To see which sleep states your PC reports, run powercfg /availablesleepstates. Microsoft says it reports the available sleep states and attempts to explain why others are unavailable.
On a PC that is not limited this way, you can try recreating the plan from Microsoft’s default:
- In the administrator window, run
powercfg /duplicatescheme 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c. Microsoft says the command duplicates the scheme and displays the new GUID. - Copy the GUID Windows prints.
- Run
powercfg /setactivefollowed by that new GUID. - Run
powercfg /listagain to confirm the copy is marked active.
If the duplicate command returns an error, or the new plan never becomes active, stop there and use Best performance instead.
Use Best performance in Power mode instead
Power mode is Windows 11’s own performance setting, and it works on PCs that only have Balanced.
- Open Settings > System > Power & battery.
- Find Power mode. On a laptop you can set it separately for Plugged in and On battery.
- Choose Best performance. The other choices are Balanced and Best power efficiency.
If the Power mode menu can’t be changed, Microsoft says a custom power plan might be selected. Go back to Control Panel > System and Security > Power Options and select Balanced; Power mode then becomes available again.
Laptops: battery life and heat
Microsoft’s PC performance tips say that selecting Best performance increases power consumption, and that on laptops it will drain the battery more quickly and may cause the device to run warmer. The same logic applies to the High performance plan, which Microsoft describes as trading power consumption for performance.
A sensible pattern on a laptop is Best performance when plugged in and Balanced or Best power efficiency on battery. If the fans get loud under load, changing fan speed in Windows 11 and 10 explains what your PC maker’s tools can and can’t adjust. Processor boost behavior is a separate topic, covered in checking Turbo Boost on a Windows 11 PC.
Go back to Balanced
- Control Panel: System and Security > Power Options, then select Balanced.
- Command line: run
powercfg /setactive 381b4222-f694-41f0-9685-ff5bb260df2e, the Balanced GUID Microsoft uses in its own example. - Settings: set Power mode back to Balanced once the Balanced plan is active.
This article sticks to the plans and commands Microsoft documents. Registry edits that unhide plans, downloaded plan files and third-party power tools are left out. For a broader look at the same setting from another angle, see enabling High performance mode in Windows 11.
High performance plan answers
Is Best performance the same thing as the High performance plan?
No. Best performance is a Power mode choice in Settings; High performance is a separate plan in Power Options. Microsoft notes that if Power mode can’t be changed, a custom power plan might be selected, and selecting Balanced in Power Options fixes that.
Why does my desktop show High performance but my laptop does not?
Different hardware. If the laptop supports Modern Standby, Microsoft says it only allows Balanced or plans derived from it, while a PC without Modern Standby may not have that limit.
Can I tell which plan is active without opening Control Panel?
Yes. Run powercfg /getactivescheme in Terminal; Microsoft says it retrieves the currently active power scheme.
Next step: open Power Options, match what you see to the table at the top, and use Best performance if the classic plan isn’t there.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.