How to Calibrate a Touch Screen in Windows 10 and 11

Touch calibration lives in Control Panel under Tablet PC Settings, and you’ll only find it on a PC where Windows detects a touch screen or pen. Use Calibrate when taps land a little off from your finger, and use Setup when touching one monitor moves the pointer on a different one.

The same tool is listed for both Windows 10 and Windows 11. Windows 10 reached end of support on October 14, 2025, and Microsoft offers consumer Extended Security Updates (ESU) until October 12, 2027.

Open the calibration tool

There are two ways in, and both lead to the same window.

  • Search: select the search box on the taskbar (or Start), type calibrate, and select Calibrate the screen for pen or touch input in the results. This is the route Microsoft’s Surface support answer gives.
  • Control Panel: open Control Panel, select Hardware and Sound, and then select Calibrate the screen for pen or touch input. ASUS lists this route in the Windows 11 section of its touch screen troubleshooting FAQ; its Windows 10 section uses the search route above. On some PCs the link sits under a heading named Tablet PC Settings, and in the Large icons view of Control Panel you may see Tablet PC Settings as its own item.

Either way, a small window titled Tablet PC Settings opens. Microsoft doesn’t publish a step list for this window on its support site, so the button names below are the ones the window commonly shows. A PC maker’s build of Windows can label things slightly differently.

No result when you search? Check that touch is detected

If the search finds nothing, Windows probably doesn’t see a touch screen or pen at all. ASUS suggests searching for View pen and touch info. In the window that opens, look at the Pen and Touch line. A message such as “No pen or touch input is available for this display” means Windows has no working touch hardware to calibrate, and the fix is in the troubleshooting section further down, not in calibration.

Calibrate the touch screen

Calibration teaches Windows where your taps really land. Before you start, clean the screen and sit or stand the way you normally use the device, because the result reflects how you tap during the test.

  1. Open Calibrate the screen for pen or touch input using either route above.
  2. On the Display tab, if you have more than one monitor, pick the touch screen in the display list.
  3. Select Calibrate.
  4. If Windows asks which kind of input to calibrate, choose Touch input for fingers, or Pen input for a stylus. If Windows asks for permission, select Yes.
  5. Follow the on-screen directions. The test usually shows a series of crosshair targets; tap the exact center of each one.
  6. When the test ends, Windows usually asks whether to save the calibration data. Save it to keep the new settings.
Windows Tablet PC Settings dialog on the Display tab with the Calibrate and Setup buttons
Use Calibrate for accuracy; use Setup to tell Windows which screen is the touch screen.

The image above comes from an older version of Windows, so your window may look a little different.

Now test it. Open Paint or any app with small buttons and tap near each corner and edge. Accuracy problems usually show up at the edges first. If taps are still off, run calibration again, tapping more carefully, or undo it with Reset (covered below) and start over.

Point touch input at the right monitor with Setup

Setup solves a different problem from Calibrate. If you tap your touch monitor and the pointer jumps on another display, the taps are accurate but Windows has matched the touch sensor to the wrong screen. Calibrating won’t fix that; Setup will.

  1. Open Calibrate the screen for pen or touch input.
  2. Select Setup.
  3. Choose Touch input. (ASUS notes to choose Pen input instead if you’re setting up a stylus.)
  4. Follow the on-screen directions. Windows shows instructions on each screen in turn; touch the screen that displays them when it’s your touch screen.
  5. On screens that aren’t touch screens, the directions say how to move on to the next display (pressing Enter usually does it).

This matters most on a laptop with an external monitor, or a desktop with a touch monitor beside a regular one. After rearranging displays, for example after changing which one is the main screen in changing the primary monitor in Windows 10, run Setup again if taps start landing on the wrong display.

Undo a calibration with Reset

If calibration made things worse, go back to the factory settings rather than trying to calibrate your way out.

  1. Open Calibrate the screen for pen or touch input.
  2. On the Display tab, select Reset.
  3. Confirm with Yes (some versions show OK), and follow any on-screen instructions.
  4. Restart the PC and test touch again.

If Reset is dimmed, the touch calibration is already at its factory settings, so there’s nothing to undo. That’s how Microsoft explains it for Surface devices, and Microsoft’s Surface support answer adds that Surface screens come calibrated from the factory and it doesn’t suggest recalibrating them manually: Reset is the better fix there. See the Surface calibration answer on Microsoft Q&A.

If Calibrate is missing or taps are still off

Work down this list. The early items are quick and fix most problems.

  • Clean the screen and check the protector. Both ASUS and Dell list dirt and screen protectors as causes of poor or phantom touch. Remove a thick, bubbled or cracked protector and test without it.
  • Look for an external cause of ghost touches. Dell’s touchscreen troubleshooting article also lists connected USB devices and an ungrounded or non-original power adapter. Unplug devices one at a time to see whether the problem stops.
  • Make sure the touch screen is turned on. Microsoft’s steps: right-click Start, select Device Manager, expand Human Interface Devices, right-click HID-compliant touch screen, and select Enable device (or Disable device to turn it off). Full steps, including HP models, are in how to enable the touch screen in Windows 10, and Microsoft’s own page is Enable and disable a touchscreen in Windows.
  • Reinstall the touch driver. ASUS describes right-clicking HID-compliant touch screen, selecting Uninstall device, then using Action > Scan for hardware changes so Windows adds it back. Resetting drivers on Windows 10 walks through that pattern and rolling a driver back.
  • Update Windows, drivers and firmware. Both makers recommend current drivers and BIOS from the PC maker’s support site. Checking drivers on Windows 10 shows how to read the touch driver’s version first.
  • Run the maker’s own diagnostic. Dell’s article refers to a SupportAssist touchscreen diagnostic test, and ASUS suggests the System Diagnosis in MyASUS. Use the tool your PC maker names on its own support page rather than a third-party “touch fixer”.

On a Windows 11 HP laptop where touch has stopped working altogether, start with turning on the touch screen on an HP laptop in Windows 11, then come back here to calibrate. If you need Device Manager for any of these steps, opening Device Manager in Windows 10 lists the quickest routes.

Touch calibration answers

Do I need to calibrate a new touch screen?

Usually not. Microsoft’s Surface answer on Microsoft Q&A says Surface screens come calibrated from the factory and doesn’t suggest recalibrating them manually. On any PC, calibrate only when taps are consistently off in the same direction, and try Reset first if someone has calibrated the screen before.

Should I calibrate again after a screen repair or a new screen protector?

If taps feel off afterward, yes. A replaced panel or a thick protector can change how touches register, so test the edges and calibrate if they’re inaccurate. If they’re fine, leave it alone.

Can I calibrate a pen as well as touch?

Yes. When the tool asks for the input type, choose Pen input instead of Touch input. Pens from some makers also come with their own settings app; if your pen maker documents its own calibration there, follow the maker’s steps.

Is this the same as color calibration?

No. Color calibration (search for Calibrate display color) changes how colors and brightness look. Touch calibration only changes where taps register.