How to Find a TV’s IP Address Without a Remote

Your router already knows the answer: every TV connected to your home network shows up in the router’s list of connected devices, with its IP address beside it, so you can read the number without touching the TV at all. If you can’t get into the router, the TV maker’s own phone app can act as the remote and take you to the TV’s network screen instead.

What has to be true before any method works

An IP address is the number your router lends to each device on the home network, such as 192.168.1.23. Apps, sound systems and home automation hubs use it to find the TV. Every method here depends on that address existing and on you being able to see it somewhere, so check these points first:

  • The TV has to be connected already. A TV gets an IP address only when it joins a network over Wi-Fi or an Ethernet cable. If it has never been set up on your network, it has no address to find, and connecting it for the first time needs the TV’s own menus (a remote, or a replacement remote from the TV maker).
  • The TV has to be on. Use the power button on the TV itself if needed. A TV that is fully off usually drops off the network or shows as offline in the router’s list.
  • You need access to something on the same network. That’s the router (through its app or web page), or a phone on the same Wi-Fi as the TV for the maker’s remote app.
  • It should be your network. Sign in only to a router you own or are allowed to manage.

Two more terms show up in router lists. A MAC address is a fixed hardware ID for the TV’s network connection, and DHCP is the router feature that hands out IP addresses automatically. Because of DHCP, a TV’s address can change after a restart, which is why the troubleshooting section covers reservations.

If there’s no router access, no phone app that can reach the TV, and no keyboard support, there is no maker-documented way to read the address off the TV. In that case the practical fix is a replacement remote from the TV maker.

Find the TV in your router’s device list

The router hands out every address on your network, so its list is the most reliable place to look, whatever brand of TV you have. Most routers offer two ways in: a phone app from the router maker or internet provider, and a web page you open in a browser. The menu names differ between makers, so the examples below come from three makers’ own help pages.

In the router maker’s app

For ASUS routers, ASUS’s connected devices help page says to connect your phone to the router’s Wi-Fi, log in to the ASUS Router app, and tap Settings. The app lists connected and offline devices with each one’s name, IP address and connection type. Tap a device to see its MAC address and IP address.

For Linksys routers, Linksys’s device list help article says to connect to the router’s Wi-Fi, open the Linksys app and log in, tap the menu icon in the upper-left corner, and tap Devices. The list shows each device’s connection type, and tapping a device shows more information. Linksys’s page doesn’t say the IP address appears there, so if it doesn’t, use the router’s web page.

For Google Wifi and Google Nest Wifi, Google’s help page on connected devices describes two apps. In the Google Home app, open Home Wifi, then Devices, to see what’s connected. In the Google Wifi app, open Network, then Devices, tap the TV, and open the Details tab, which shows the connection status, IP address and MAC address.

For other brands, including routers supplied by your internet provider, open the app and look for a list of connected devices or clients. If your router has no app, use its web page.

In the router’s web page

  1. On a computer or phone connected to your home network, open a web browser.
  2. Type the router’s address in the address bar. The router maker’s manual or support site gives it; ASUS, for example, accepts the router’s LAN IP address or asusrouter.com.
  3. Sign in with the router’s admin name and password. If you’ve never changed them, the router’s documentation says what the defaults are.
  4. Open the list of connected devices. On ASUS routers, that’s Network Map, then the Clients icon. Other makers use their own names for this list; your router’s manual names it.
  5. Find the TV and note the IP address next to it.

Can’t find the router’s own address? On an iPhone connected to the home Wi-Fi, the Router row on the network’s details screen shows it; finding the IP address on an iPhone walks through that screen.

Pick out the TV from a long list

Router lists often include phones, speakers, printers and entries with no name at all. These checks narrow it down:

  • Look for the brand or platform. TVs often appear with a name that includes the maker (Samsung, LG, Sony, Hisense, TCL, Vizio) or the platform (Roku, Google TV, Android TV).
  • Switch the TV off and on. Note the list, power the TV off at its own button, wait a minute and refresh, then turn it back on and refresh again. The entry that drops out and returns is the TV.
  • Check the connection type. If the TV uses an Ethernet cable, it shows as wired; a Wi-Fi TV shows as wireless. ASUS’s app shows the connection type directly.
  • Match the MAC address. Some TVs print it on a label, and once you can reach the menus, most show it on an About or network information screen. If the MAC in the router list matches, you have the right device.

Prefer a full list of every address on the network from a Windows computer? Seeing all IP addresses on your network in Windows 10 does that with built-in commands, then checks the result against the router.

Use the TV maker’s phone app as the remote

Most smart TV platforms have an official app that controls the TV over your Wi-Fi. Once it’s connected, you can move through the TV’s menus and open the network screen. Each app needs your phone on the same Wi-Fi network as the TV, and some need the TV to have been set up with the app or an account before.

Samsung TVs: SmartThings

Samsung’s SmartThings remote help page says the TV must already be added to SmartThings as a device, and you need a Samsung account and an internet connection. If the TV was registered when it was set up, open SmartThings on your phone, find the TV in your list of devices, and select it. An on-screen remote with arrow controls, Home and Back appears in the app.

If the TV was never added to SmartThings, this route may not work without a remote, because adding it can involve the TV’s own screens. Samsung also notes that without a Samsung account sign-in, only external inputs and over-the-air TV are available.

With the remote on your phone, go to the network screen listed in the menu table below and select IP Settings.

Roku TVs and Roku players: the Roku remote app

Roku’s Roku remote app page says your phone and the Roku device must be on the same Wi-Fi network. Roku’s phone connection article adds a few more checks:

  1. Install the Roku remote app and connect your phone to the same Wi-Fi as the TV.
  2. On an iPhone or iPad, open Settings > Roku and make sure Local Network is turned on.
  3. Turn off any VPN on the phone.
  4. Open the app and choose your Roku when it appears. The remote in the app now controls the TV.
  5. Go to Settings > Network > About on the TV and look for the IP address on that screen.

The Roku must also allow control from apps. Roku’s app control article places this under Settings > System > Advanced system settings > External Control > Network access; Roku’s phone connection article calls the same setting Control by mobile apps. If it was switched off, changing it back needs a physical Roku remote.

The two methods work well together: if the app doesn’t find the Roku on its own, Roku’s article describes connecting manually by typing the device’s IP address, and the router’s device list is where you get that number.

Google TV and Android TV

Google’s phone remote help page covers Chromecast with Google TV and the Google TV Streamer:

  1. Connect your phone to the same Wi-Fi as the TV.
  2. On Android, open the Google TV app and tap Connect TV near the bottom right. On an iPhone, open the Google Home app, tap the device and tap Open remote.
  3. Select your device, enter the code shown on the TV, and tap Pair.
  4. Use the remote in the app to open the TV’s settings. You can type with your phone’s keyboard, too.

For TVs with Android TV, Google’s Android TV network help page says the phone must be on the same network as the TV and lists the network status screen at Settings > Network & Accessories > Network > Advanced > Network status. Menu names on TVs from other makers that run Google TV vary by model.

Vizio TVs

Vizio’s M-Series user manual says the VIZIO Mobile App can turn a smartphone into a remote. The manual doesn’t state the network requirement, so connect the phone to the same Wi-Fi as the TV to be safe. Check the manual for your own model, since Vizio’s menus differ between years.

LG, Sony, TCL, Hisense and Fire TV

These makers have their own remote apps too, and each one’s setup differs by model and year. Look up your model on the maker’s support site for the current app name and pairing steps. Expect to need the TV switched on and your phone on the same Wi-Fi network.

Plug in a keyboard or mouse

Some smart TVs accept a USB keyboard or mouse, which lets you move through the menus with the arrow keys and Enter, or with a pointer.

  1. Find a free USB port on the TV, usually on the back or side.
  2. Plug in a USB keyboard or mouse, or the small USB receiver of a wireless set.
  3. Wait a few seconds, then try the arrow keys or move the mouse.
  4. Open the TV’s settings and go to the network screen in the table below.

Samsung’s keyboard and mouse page (Samsung Australia) says most Samsung TVs made before 2018 recognize a USB keyboard or mouse automatically, that keyboard and mouse connections may not be supported on some models, and that models and menus vary by location. Hisense’s U8H user manual also describes plugging a USB keyboard or mouse into the TV’s USB port.

A Bluetooth keyboard is harder. Pairing one goes through the TV’s Bluetooth menu (Samsung’s Bluetooth device list, or Remotes & Accessories on Hisense’s Google TV models), and reaching that menu normally needs a remote or the phone app first. For other brands, the TV’s manual says whether keyboards are supported.

Where each TV shows its IP address

Once you can move through the menus by app, keyboard or mouse, here’s where the makers point. Rows marked “varies by model” have no maker page with a confirmed path.

TV or platform Where to look
Samsung (2022 and newer) All Settings > Connection > Network > Network Status, then IP Settings. On some models, open General, then Network.
Samsung (2021 and older) Press Home to open Smart Hub, then select Settings > General > Network > Network Status, then IP Settings.
Roku TV or Roku player Settings > Network > About
Android TV Settings > Network & Accessories > Network > Advanced > Network status
Hisense Google TV (U8H manual) Settings > System > About > Status for network status; for a wired connection, Settings > Network & Internet, then the Ethernet section, shows the IP settings.
Vizio (2022 M-Series manual) Menu > Network > Network Information shows connection details; the Manual Setup screen holds the IP Address field.
LG, Sony, TCL, Fire TV and other Google TV models The TV’s Network, Network & Internet or About screen. Varies by model; check the maker’s support site.

A few notes on these screens:

  • Samsung’s US network troubleshooting page gives the 2022-and-newer path, and Samsung Canada’s network status page gives the older one and describes IP Settings as the place to access and modify the IP and DNS settings. The Network Status screen also shows whether the TV can reach the router and the internet.
  • On the Vizio Manual Setup screen, the manual says DHCP must be turned off before you can edit the address. Don’t change anything there just to read the number; a wrong manual address can take the TV off the network.
  • If a screen shows an address of 0.0.0.0, or none at all, the TV usually isn’t connected to the network, and the router won’t list it either.

When the TV won’t show up or its address changes

The TV isn’t in the router’s list

Make sure the TV is fully on and refresh the list. If it still doesn’t appear, the TV may not be connected at all, or it may be on a different network, such as a second router, a range extender with its own network name, or a guest network. Check every network your router or mesh system broadcasts.

The phone app can’t find the TV

  • Put the phone on the same Wi-Fi network as the TV, not mobile data and not a guest network, since guest networks often keep devices from seeing each other.
  • On an iPhone, check that the app has Local Network permission in Settings (Roku names this setting).
  • Turn off any VPN on the phone, as Roku advises.
  • For Roku, make sure control by apps is allowed on the TV, as described above.

The address keeps changing

Routers lend addresses for a set time and may give the TV a new one after a restart. If an app or sound system needs the TV at the same address every time, set a reservation (often called a DHCP reservation or address reservation) in the router, using the TV’s MAC address from the router list. The steps depend on the router maker, so search the maker’s support site for “reservation”. The same idea applies to computers; finding your MAC address in Windows 10 explains why the router uses the MAC to recognize a device.

You can’t sign in to the router

If you never changed the admin password, the router’s documentation gives the default. If you changed it and forgot it, ask your internet provider (for a provider router) or check the router maker’s support site. A factory reset of the router erases all its settings, including your Wi-Fi name and password, so leave it as a last resort.

TV IP address answers

Can I find the address while the TV is off?

Not reliably. Some routers keep showing a device that left until its lease runs out, and the ASUS app lists offline devices, so you may see the last address the TV used. Turn the TV on to be sure the number is current.

Is the TV’s IP address the same as my home’s internet address?

No. Inside your home, the router lends the TV a local address of its own, while everything in the house usually shares a single public address on the internet. Apps and devices at home need the local one, the address in the router list.

Why do I need the TV’s IP address at all?

Common reasons are connecting a remote app manually (as Roku’s app allows), adding the TV to a home automation hub or sound system, setting a router reservation, or troubleshooting a connection. For sending a computer’s screen to the TV, you usually don’t need it: casting Windows 10 to a TV and casting Windows 10 to a Roku pick the TV by name.

Does a wired TV have a different address from the same TV on Wi-Fi?

It can. A TV’s Ethernet port and its Wi-Fi each have their own MAC address, so the router may treat them as two devices and lend each its own IP address. Look for the entry that matches how the TV is connected right now.

Start with the router list; if it’s out of reach, pair the maker’s app, and once you have the number, set a reservation so you only have to look it up once.