Turn the camera off from the Google Home app: open Cameras, tap your camera, and tap Turn off in its live view. A camera that is off stops streaming and recording until you turn it back on. A schedule or Google’s home-and-away switching can turn it off at set times, and the microphone can be muted on its own.
These steps are for a Nest camera or doorbell on your own Google Home account.
What turning a camera off does
Google’s help page on how to turn a Nest camera on or off spells out what “off” means. When you turn a camera off in the Google Home app or the Nest app, it will not detect sound or motion, stream live video, or record and save activity.
What it does not do is cut the power. The camera stays powered and connected to Wi-Fi, which is why you can turn it back on from your phone. That also means it can come back on by itself: Google says a camera can switch on automatically with its schedule, when you leave home, or in case of emergency. If you need it to stay off no matter what, see the section on powering it down completely.
The status light is not a reliable signal on every model. Google’s page on Nest camera and doorbell lights says the light is off on most current cameras and doorbells when they are turned off manually, on a schedule, or by Home mode. On the Nest Doorbell (wired, 1st gen), the light ring stays dim but not fully off.
Turn one camera off in the Google Home app
- Open the Google Home app on your phone or tablet.
- On the Home tab, tap Cameras.
- Tap the camera you want to turn off. Its live view opens.
- Tap Turn off.
- To turn it back on, open the same camera and tap Turn on.

The illustration above shows a generic camera screen. In the current Google Home app, the control is labeled Turn off, and schedules are set up as described further down.
Turn every camera off at once
With several cameras, you don’t need to switch them one at a time. In the Google Home app, tap Home > Cameras and tap All off. To turn a camera back on afterward, open its live view and tap Turn on.
Older cameras in the Nest app
Some older cameras are still managed in the Nest app. Google lists the Nest Cam IQ, Nest Cam Indoor and Outdoor, and the Nest Doorbell (wired, 1st gen) among the older devices that can move to the Google Home app. Until yours moves, use the Nest app:
- Open the Nest app and tap your camera.
- Tap Settings.
- Turn off the camera’s on/off switch.
If a camera is already off, tap it in the app to turn it on again. Google also notes that the Nest app isn’t compatible with newer camera and doorbell models, so a camera you bought recently belongs in the Google Home app. If your Nest account was never moved to a Google Account, the steps to migrate a Nest account to a Google Account explain what changes first.
Turn it off on a schedule
Cameras are on all the time by default. Google’s page on camera schedules describes two ways to change that.
Google Home app: household automations
- Open the Automations tab and tap Add.
- Choose Household and give the automation a name, such as “Cameras off at 7 a.m.”
- Tap Add starter and pick At a specific time or At sunrise or sunset.
- Tap Add action, choose Adjust Home Devices, pick the camera, and set it to turn off.
- Save it, then create a second automation that turns the camera back on.
For a full off-and-on schedule, Google says to create at least two automations: one that turns the camera off and one that turns it back on. To pause a schedule without deleting it, open the automation, turn off Activate Routine, and save.
Nest app: camera schedule
In the Nest app, tap the camera, tap the settings icon, open Schedule, and turn it on. Pick a day, tap Add time to set when the camera goes off and on, and use Repeat to copy the times to other days. Google allows up to 32 on and off times per week.
Turn it off when you are home
Instead of fixed times, the camera can follow your household’s comings and goings. Google’s home and away automation page describes it this way: the camera turns on when everyone who shares access to the home has left with their phone, and turns off when the first person comes back.
- In the Google Home app, tap Home > All devices.
- Tap or touch and hold the camera’s tile, then tap Settings.
- Turn on Automatic on/off. The first time, you may be asked to tap Setup presence sensing, which uses your phone’s location.
In Home mode, Google lists the stream, activity alerts, and video history as off, while the camera stays powered. In the Nest app, the same feature is called Home/Away Assist. Each person whose phone should count needs location sharing turned on for the home.
Power it down completely
Unplugging is the only way to be sure the camera is not running at all. Google says a wired camera powers off fully when unplugged. A battery-powered camera keeps working for as long as its battery is charged, so unplugging it from its charger does nothing until the battery runs out.
When you plug a camera back in, Google says it usually reconnects in under a minute. If it doesn’t come back, the steps to reset a Google Nest camera cover restarting it, and the guide to charge a Google Nest Cam (battery) helps if a battery model went flat while it was off.
Turn off only the microphone or alerts
Sometimes you want video to keep running but not sound. Google’s page on camera audio settings gives two choices under Settings > Audio for the camera (reach it from Home > All devices: touch and hold the camera’s tile, then tap More > Settings > Audio):
- Microphone off: no audio is streamed or recorded.
- Audio recording off: video is saved without sound, but live audio still works and you won’t get sound alerts.
To stop the phone buzzing while the camera keeps recording, open the camera’s Settings > Notifications and switch off the alert types you don’t need.
- It switched itself on. Check for a schedule or household automation, and check whether Automatic on/off is on. Google says to turn off automatic switching for a camera that already uses a schedule, since both can change it.
- No Turn off button. Your role in the home matters. On Google’s household permissions page, an Admin has full control, while a Member gets full device control and device settings only with Settings access. An Admin can turn a Member’s Settings access on.
- It says offline, not off. Offline means the camera can’t connect, so it can’t detect activity or record video. Off is a choice made in the app. Check the power supply and your Wi-Fi, and keep the camera updated as described in how to update Google Nest devices.
Nest camera off answers
Can someone else in my home turn the camera back on?
Yes, if they are an Admin or a Member with Settings access. Review who has access, and what each person can do, in the home’s settings in the Google Home app.
Does turning the camera off delete my saved video?
Google’s on and off page says a camera that is off won’t record and save activity; it says nothing about deleting video you already have. Delete video history is a separate item in the camera’s settings.
Does this work the same for a Nest Doorbell?
Google’s on and off page covers cameras and doorbells together, so the steps match. For other doorbell tasks, see how to reset a Google Nest Doorbell or charge a Google Nest Doorbell.
What about the camera on a Nest Hub Max?
The Hub Max is a smart display rather than a Nest Cam, so its camera has its own steps. They are covered in managing the camera on a Google Nest Hub Max.
A camera you own is yours to switch on and off, but people in its view still deserve to know when it is running. Start with Turn off for a quick break, and set up a schedule or Automatic on/off if you find yourself doing it every day.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.