How to Play Google Minesweeper (Rules and Strategy)

To play, search for minesweeper on Google and select Play on the Minesweeper card; the game opens right on the results page, with nothing to install. The goal fits in one line: uncover every square that does not hide a mine, using the numbers you reveal to work out where the mines are.

Open Google Minesweeper

  1. Go to Google in any browser on a computer, phone or tablet, or open the Google app.
  2. Search for minesweeper. A “Games from Google” row appears with Minesweeper (labeled Puzzle) as one of the cards, next to games such as Snake and Solitaire.
  3. Select Play on the Minesweeper card. The board opens with a green header bar across the top.
  4. Pick a difficulty from the drop-down at the left of the header if you do not want the default, then click or tap any square to start.

The header holds everything you need during a game:

  • Difficulty drop-down (left): Easy, Medium or Hard, with a check mark beside the current level. Medium is the default.
  • Flag counter (center, red flag icon): starts at the number of mines on the board.
  • Timer (center, stopwatch icon): a three-digit clock that starts at 000.
  • Sound, share and close (right): a speaker icon toggles sound, a share icon shares the game, and the X closes it and returns you to the results.

Before your first move, the board shows a small hint picture of a shovel and a mouse with the left button highlighted. That is the game’s way of saying a left click digs (reveals) a square. No Google Account appears to be needed to play. Google changes its built-in games from time to time, so icons and positions may shift a little.

On a phone, the same search works in the Google app or a mobile browser.

How the numbers work

The board is a grid of covered squares, and some of them hide mines. Revealing a mine ends the game. Revealing every safe square wins it. You do not have to flag a single mine to win; flags are only notes to yourself.

  • A number (1 to 8) tells you how many mines touch that square, counting all eight neighbors: up, down, left, right and the four diagonals.
  • A blank revealed square has no mines around it, so the game opens all its neighbors for you. That chain reaction is why one click can clear a large area.
  • The flag counter goes down as you place flags, and it cannot tell a right flag from a wrong one, so read it as “mines left, if all my flags are correct.”
  • The timer starts with your first move.

The first click is normally safe and often opens a patch of empty squares, which gives you numbers to work from. Treat that as typical behavior rather than a promise.

Controls on a computer and a phone

Action Computer Phone or tablet
Reveal (dig) a square Left-click Tap
Place or remove a flag Right-click the square Touch and hold, or switch to flag mode if the game shows a dig/flag toggle
Change difficulty Difficulty drop-down at the left of the header
Start over Pick a difficulty again from the drop-down

The game’s own hint only shows a left click for digging; right-click and touch-and-hold are the usual Minesweeper flag controls, so if they do nothing, look for a dig/flag toggle near the board.

On a Mac without a two-button mouse, a right-click is a secondary click: hold Control while you click, or set a secondary click for the trackpad in System Settings, as Apple explains in Right-click on Mac.

Classic Windows Minesweeper lets you click a number whose mines are all flagged to open its remaining neighbors at once, a shortcut called chording. Support for it in Google’s version is not documented, so open squares one at a time unless you have seen it work on your board.

Flagging without a mouse

Laptop touchpads, touchscreen laptops and keyboard-only setups each handle the flag differently. Those methods are covered in how to flag on Google Minesweeper without a mouse.

Difficulty levels

When each level starts, the flag counter shows its mine count, which is the most reliable way to know what you are facing.

Level Mines (flag counter at start) Board Good for
Easy 10 Smallest, square board Learning the rules; most games end in a minute or two
Medium (default) 40 Wider and taller Practicing the patterns below
Hard 99 Largest board Long games where forced guesses happen more often

A sensible path: stay on Easy until you can win most games without guessing, move to Medium once the 1-2-1 pattern jumps out at you, and treat Hard as a test of patience and careful counting.

Strategy: the moves that solve most boards

Minesweeper is mostly logic. Most squares can be settled by reading one number at a time, and the rest by comparing two numbers that share neighbors.

Get an opening first

If your first click reveals only a single number, click another square away from it until you open an area with several numbers along its edge. That edge, the border between revealed and covered squares, is where all the logic happens.

Rule 1: every covered neighbor is a mine

If a number touches exactly as many covered squares as its value, all of them are mines. A 2 with two covered neighbors means both are mines; flag them.

Rule 2: a satisfied number frees its neighbors

If a number already touches as many flags as its value, every other covered square around it is safe. A 1 next to a flagged mine lets you open all its other covered neighbors.

Rule 3: subtract the flags you know

Take away known mines to get a smaller number. A 3 that touches one flag needs exactly two more mines among its remaining covered neighbors, which you can then treat like a 2.

Patterns along a wall

These patterns appear where a row of revealed numbers runs along a straight line of covered squares. In the examples below, the top row is revealed and the bottom row is covered, with letters standing in for the covered squares.

Revealed 1 2 1
Covered A B C

1-2-1: A and C are mines, and B is safe. Here is why: if B were a mine, it would satisfy both 1s, so A and C would both be safe, leaving the 2 with only one mine. That contradiction rules B out, so the 2’s two mines must be A and C.

1-2-2-1: with numbers 1, 2, 2, 1 over covered squares A, B, C, D, the mines are B and C (the squares under the two 2s), and A and D are safe. Check it the same way: B and C give each 1 one mine and each 2 two mines.

Revealed Edge 1 1 ?
Covered Edge A B C

1-1 starting at an edge: the first 1 sits against the edge of the board (or a cleared area), so its only covered neighbors are A and B, and exactly one of them is a mine. The second 1 touches A, B and C. Since its single mine is already in A or B, C must be safe. Open C, and the new number it shows usually settles A and B.

Count the shared mines

A frequent mistake is placing a new flag for a number that an existing flag already satisfies. Before flagging, check whether a mine you already marked counts for that number too. Two neighboring numbers often share the same mine.

Use the counter in the endgame

Near the end, the flag counter can decide what logic cannot. If two separate covered areas remain and the counter says one mine is left, and one area must hold at least one mine, the other area is safe.

A short worked example

Say an opening leaves this edge along the left side of the board: a 1, then a 1, then a 2 in the revealed row, sitting above covered squares A, B and C, with one more covered square, D, below and to the right of the 2. Everything else around these numbers is already revealed. The 1-1 rule says C is safe, so open it. The 2 touches B, C and D, and C is now known to be safe, so B and D are both mines. With B a mine, the first 1 is satisfied, which makes A safe. Three moves and no guessing: open C, flag B and D, open A.

Mistakes that end games early

  • Clicking at random once an opening exists. Every click after the first should come from a number you can point to.
  • Over-flagging. Placing flags you are not sure of makes the counter lie and leads to bad deductions later. Flag only certain mines, or skip flags and just avoid those squares.
  • Ignoring corners and edges. Squares there have fewer neighbors, so numbers near them are easier to solve. Clear them before moving into the middle.
  • Rushing for time. The timer rewards speed, but a lost game has no time at all. Speed comes from recognizing patterns, not from clicking faster.

When you have to guess

Not every board can be finished by logic alone. Sometimes two squares are equally likely to hide the last mine, a true 50/50. A few habits limit the damage:

  • Guess early. If a forced guess is unavoidable, make it as soon as you spot it, not after ten minutes of careful play.
  • Pick the lowest odds. A 1 touching four covered squares gives each of them roughly a one-in-four chance (when no other number touches them), which is safer than a coin flip between two squares next to a 1.
  • Pick the most useful square. Among equally risky squares, choose one that would open new information if it is safe, such as a square away from the edge that could start a new opening.

Fix card, flag and sound problems

The game card does not appear

Search for the single word minesweeper, with no other words. Browser extensions, some search settings or a regional Google page may hide the card; try a private window or another browser.

Right-click opens a menu instead of placing a flag

Click inside a square on the board, not on its border or the header. An extension that changes right-click behavior can also interfere, so a private window, where extensions are usually off, is a quick test.

Touch and hold does not flag

Look for a dig/flag toggle near the board. When flag mode is on, every tap places a flag, so switch back before you try to open a square. If the browser opens a text-selection menu instead, try the Google app or a different browser.

The board is too small to tap

Turn the phone sideways, pinch to zoom, or switch to Easy.

No sound, or too much

Use the speaker icon on the right of the header, and check the device volume and whether the browser tab is muted.

Minesweeper rules questions

Can I play offline?

You need a connection to search for and load the game. Google does not document offline play for it.

Does Google keep my best times?

The game does not appear to keep a record of times or a leaderboard, so note any time you want to remember before you close it.

Is it the same game as Windows Minesweeper?

The rules are the same: numbers count neighboring mines, flags mark them, and the mine counts on the three levels match the classic Beginner, Intermediate and Expert games. The look, touch controls and extras such as chording can differ.

Do I lose if I flag a square that is not a mine?

No. A wrong flag only throws off your flag counter. You lose only by revealing a mine, so a wrong flag matters only if it makes you trust the counter too much.

The same Games from Google row has more to try. If Snake is next, see how to beat Google Snake and how to customize Google Snake, or take on Google Tic Tac Toe on Impossible.