Back up your BitLocker recovery key before you touch the TPM setting: turning TPM off can make Windows ask for that key at the next start, and without it the drive stays encrypted. Windows 11 expects TPM 2.0 because Microsoft lists it as a minimum requirement and uses it for BitLocker and Windows Hello. The switch itself is in your PC’s UEFI firmware, so the order is: save the key, suspend BitLocker, restart into firmware, change the setting, then check the result.
What changes when the TPM is off
A Trusted Platform Module (TPM) is a security processor, either a chip on the motherboard or a feature built into the processor, that stores keys for Windows. Microsoft’s page What’s a Trusted Platform Module (TPM)? names the two features most people notice:
- BitLocker and device encryption. “BitLocker uses the TPM to encrypt your hard drive.” With the TPM unavailable, Windows can ask for the 48-digit recovery key at startup instead of opening the drive on its own.
- Windows Hello. “Windows Hello uses the TPM to securely store biometric data” and PINs. Keep your account password handy for sign-in while the TPM is off, and set up Windows Hello again if Windows asks.
There is also the requirement itself. Microsoft’s Windows 11 specifications list “Trusted Platform Module (TPM) version 2.0”, and the TPM page says plainly that “Windows 11 requires TPM version 2.0.” Microsoft’s pages do not describe what an already installed copy of Windows 11 does with the TPM turned off, so do not plan on running that way long term. Treat turning it off as a temporary step for a specific job, such as troubleshooting firmware or preparing hardware, and turn it back on afterward.
On a work or school PC, stop here and ask your IT department. Your organization may manage the TPM and BitLocker, and changing either on your own can conflict with how the device is managed.
Step 1: Save the recovery key and suspend BitLocker
First find out whether encryption is on at all; telling if BitLocker is enabled on Windows 11 shows the quick checks. If it is on, save the key using Microsoft’s back up your BitLocker recovery key steps:
- Select Start, search for BitLocker and select Manage BitLocker.
- Select Back up your recovery key next to the drive.
- Choose Save to your Microsoft Account, Save to a USB flash drive, Save to a file or Print the recovery key, then select Finish. Keep the copy somewhere other than the PC you are changing.
On Windows 11 Home, encryption usually appears as device encryption instead. Microsoft’s device encryption page puts it under Settings > Privacy & security > Device encryption, and says that when you sign in with a Microsoft, work or school account, the recovery key is attached to that account. Confirm you can see it there before you continue. If you cannot find a key anywhere, work through where to look for your BitLocker recovery key first.
Next, suspend protection so the firmware change does not trigger recovery. Microsoft’s guidance on suspending BitLocker before firmware changes warns that if protection isn’t suspended, “you’ll be prompted to enter the recovery key” at the next restart. The steps are:
- Open Control Panel.
- Select System and Security > BitLocker Drive Encryption > Suspend protection.
- Select Yes.
(Microsoft’s page is written for Windows 10; on Windows 11 the same Control Panel entry is used if your screen matches, otherwise use the PowerShell command below.) The same page gives a PowerShell route: Suspend-BitLocker -MountPoint "C:" -RebootCount 0. A RebootCount of 0 keeps protection suspended until you resume it yourself, which suits a change you plan to undo later.
Step 2: Restart into UEFI Firmware Settings
Microsoft documents this path from inside Windows 11 in its Secure Boot enablement guide:
- Open Settings.
- Select System > Recovery.
- Next to Advanced startup, select Restart now.
- On the Choose an option screen, select Troubleshoot.
- Select Advanced options.
- Select UEFI Firmware Settings, and then select Restart.
Microsoft adds that “Firmware menus and Secure Boot settings vary by manufacturer and device model.” If the tile is missing or Windows will not start, opening the BIOS in Windows 11 lists other ways in, and entering the BIOS on Windows 10 covers the startup keys PC makers use.
Step 3: Find your maker’s TPM setting
Every firmware screen is different, and the setting name depends on the board and processor. Use the name your maker documents rather than guessing:
| Maker | Where the maker’s own page puts it | What to set |
|---|---|---|
| ASUS motherboards | Press Delete at startup, then F7 for Advanced Mode. Advanced > Trusted Computing > Security Device Support (ASUS FAQ) | Disable, then F10 and OK to save |
| MSI motherboards | Settings > Security > Trusted Computing > Security Device Support (MSI FAQ, written for older boards) | MSI’s page shows the Enabled setting; choose the opposite option on that same line |
| Dell, HP, Lenovo, Acer, Surface and other brands | Your PC maker’s manual or support article for your model names the setting | Follow the maker’s wording |

Change only the TPM setting. If you see an option to clear the TPM in the same menu, leave it alone: Microsoft says, “Don’t clear the TPM directly from UEFI.” Save and exit the way your firmware screen shows (on ASUS boards, F10). The PC restarts into Windows; if BitLocker was suspended in Step 1, it should not ask for the key.
Microsoft’s TPM documentation also describes a Turn TPM Off action in the TPM management console, but notes that “You don’t normally need to turn the TPM on or off”, and its steps involve the TPM owner password. On a current PC with firmware TPM, the firmware setting above is the route the PC makers document.
Step 4: Confirm the TPM is off
- Press Windows key + R, type
tpm.mscand press Enter. ASUS’s page says that if it shows “Compatible TPM cannot be found,” TPM is disabled. - Or open Windows Security > Device security. When the TPM is available, this page has a Security processor section with Security processor details; Microsoft’s TPM page notes that if the section is missing, the TPM might be turned off.
Keep the recovery key within reach for as long as the TPM stays off, because Microsoft’s pages do not describe how BitLocker behaves on each restart in that state.
Turning the TPM back on
- Restart into UEFI Firmware Settings again (Step 2) and set the same option back to enabled. The full walk-through for that direction, including the Intel and AMD names, is in enabling TPM in BIOS; the firmware screens are the same on Windows 11.
- Back in Windows, check Security processor details in Windows Security. Microsoft says the Specification version line shows 1.2 or 2.0.
- Resume BitLocker: Control Panel > System and Security > BitLocker Drive Encryption > Resume protection > Yes, or run
Resume-BitLocker -MountPoint "C:"in PowerShell. - Set up your Windows Hello PIN, face or fingerprint again if Windows asks.
Clearing the TPM is a different job
Clearing is not a gentler version of turning it off. Microsoft’s TPM management guidance warns that “Clearing the TPM can result in data loss” and that it causes “you to lose all created keys associated with the TPM, and data protected by those keys, such as a virtual smart card or a sign-in PIN.” Microsoft also says not to clear the TPM on a device you don’t own, such as a work or school PC, unless your IT administrator tells you to. Clearing is done from Windows Security under Security processor troubleshooting, not from the firmware; clearing the TPM covers the steps and when it is worth doing.
TPM off-switch answers
Windows asked for the recovery key after I turned the TPM off. What now?
Enter the 48-digit key you saved in Step 1. Once Windows starts, turn the TPM back on (see Turning the TPM back on) so the prompt stops.
Does turning off the TPM also turn off Secure Boot?
No. Secure Boot is a separate firmware setting that checks what software starts the PC. If you also need it off, see turning off Secure Boot on Windows 11, and turning Secure Boot back on when you are done.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.