How to Create a Partition in Windows 10

Unallocated space is what a new partition is made from, so Disk Management either finds some already on the disk or frees it by shrinking an existing volume. Back up anything you care about before you touch a volume, because a wrong click on the wrong volume can erase it.

The steps below use Disk Management in Windows 10, signed in with an administrator account on a PC you own. A work or school PC follows its IT department’s rules, so ask them first.

Before you change a disk

Creating a partition is usually uneventful, but the tool you use for it can also delete and format volumes, and Microsoft’s own pages are blunt about what that does. Its Disk Management article warns: “Formatting a volume will destroy any data on the partition. Be sure to back up any data you want to save before you begin.” Treat these as the ground rules:

  • Back up first. Copy important files to an external drive or cloud storage, not to another partition on the same disk. A second partition sits on the same physical hardware, so a failing disk takes both with it. The options built into Windows 10 are covered in backing up files on Windows 10.
  • Use an administrator account. Microsoft says you must be signed in as an administrator to create a volume, and shrinking needs membership in the Administrators or Backup Operators group.
  • Leave the small system partitions alone. Most PCs have small partitions with no drive letter that Windows itself uses. Microsoft’s Disk Management overview says “The recommended practice is to not modify these partitions in any way.”
  • Know which Windows you are on. Microsoft states: “Windows 10 has reached the end of support on October 14, 2025.” Its Windows 10 end of support page explains what that means for updates. Disk Management itself works the same on current versions of Windows 11.

Where will the new partition’s space come from?

Microsoft’s rule is simple: a new volume needs either unallocated space or free space inside an extended partition. A separate partition keeps files such as projects or media apart from Windows, but it is not a backup (it sits on the same physical disk). Before opening any wizard, work out which of these describes your PC. If you are not sure how much room the drive has, check the free space on Windows 10 first.

What Disk Management shows What it means Go to
A region labeled Unallocated on a disk Space that belongs to no partition yet Turn unallocated space into a new drive
One volume with plenty of free space and no unallocated space You have to give some of that volume’s free space back to the disk Free up space by shrinking a volume
A second disk with no partitions that Windows asks you to initialize A new, empty disk Windows has not prepared yet Set up a brand-new disk first
A disk marked Offline Windows can see the disk but is not using it Set up a brand-new disk first

Open Disk Management

Microsoft lists four ways in, and they all open the same tool:

  • Start menu (recommended by Microsoft): right-click the Start button, then select Disk Management.
  • Search: type Disk Management in the search box, then select the result named Create and format hard disk partitions.
  • Run: press Windows + R, type diskmgmt.msc and select OK.
  • Computer Management: open Computer Management, then go to Storage > Disk Management.

Each physical disk (Disk 0, Disk 1 and so on) is shown with its partitions; check which disk a volume is on before you right-click it. Microsoft’s Disk Management in Windows article notes that the tool looks and works the same in Windows 10 and Windows 11.

Free up space by shrinking a volume

Shrinking takes free space from the end of an existing volume and hands it back to the disk as unallocated space. Files on the volume stay where Windows can reach them. Microsoft does warn that shrinking a raw partition that holds data, such as a database file, might destroy that data, so confirm your backup now, before the step that changes the volume.

  1. In Disk Management, right-click the volume you want to take space from.
  2. Select Shrink Volume. Windows takes a moment to work out how much it can release.
  3. In the dialog that opens, enter how much space to shrink, in megabytes (MB).
  4. Select the button that starts the shrink and wait. When it finishes, the freed space shows as unallocated on the same disk.

Microsoft’s shrink a basic volume page sets two limits worth knowing before you start: only volumes with no file system or NTFS can be shrunk, and the offer can be smaller than the free space you see (the troubleshooting section below explains why).

Decide on sizes now: as the undo section explains, giving space back later needs the new volume deleted first.

Turn unallocated space into a new drive

Once a disk shows unallocated space, the New Simple Volume wizard turns it into a partition with a drive letter. Microsoft’s steps:

  1. Right-click the unallocated region and select New Simple Volume.
  2. In the New Simple Volume Wizard, select Next.
  3. Enter the size of the volume in megabytes (MB), or accept the maximum default size to use all the unallocated space. Select Next.
  4. Accept the default drive letter or choose a different one. Select Next.
  5. In the Format Partition dialog box, either choose Do not format this volume, or keep the default settings and select Next to format it. A volume label (a name such as Projects or Media) makes the drive easier to recognize later, if you set one here.
  6. Review your choices and select Finish.

If you format the volume later from its right-click Format command, Microsoft describes the Perform a quick format option as creating “a new file table” without fully overwriting or erasing the volume; it is much faster than a normal format.

If you skip formatting, the volume exists but Windows cannot store files on it until you format it later (right-click the volume and choose Format). A full format is the same job you would do when you reformat a hard drive in Windows 10, so only do it on the new, empty volume.

One limit applies to older disks. On a basic disk with the MBR partition style, Microsoft explains that the first three partitions are created as primary partitions, and from the fourth on, each new one becomes a logical drive inside an extended partition. Disks that use GPT, the default for new disks, are designed for more than four partitions.

Set up a brand-new disk first

A second internal disk straight out of the box shows up in Disk Management as Not Initialized and has no partitions at all. Microsoft’s initialize new disks page covers the process:

  1. If the disk is marked Offline, right-click it and select Online.
  2. Right-click the disk (on the left of its bar, where it says Disk 1 or similar) and select Initialize Disk.
  3. Confirm the correct disk is selected, check the partition style and select OK. GPT is the default; Microsoft recommends MBR only for older hardware or operating systems that don’t support UEFI.
  4. The whole disk now shows as Unallocated. Use the New Simple Volume steps above, once for each partition you want.

Initialize only a disk that is new or that you are certain is empty. Microsoft warns that if a disk is already in use, you should first save its files elsewhere, because “The initialization process erases all data on the disk.” It also notes that some USB disks can’t be initialized at all. For removable drives, formatting is usually the job you want instead: see formatting a USB drive.

Check that the new drive works

  1. Open File Explorer and select This PC. The new volume appears alongside your other drives with the letter you chose.
  2. Open it and create a test folder, then delete the folder. If that works, the volume is formatted and writable.
  3. Back in Disk Management, the new block should show a file system and a healthy status. A volume with no file system listed has not been formatted yet.

If the drive does not appear in File Explorer, check Disk Management for a missing drive letter. Right-clicking the volume shows an option for changing its drive letter, which you can use to add one.

Take a partition back

Disk Management has no single undo for a new partition. Giving the space back to the original volume is two separate actions, and the first one is destructive.

  • Removing the partition deletes everything on it. Microsoft’s wording is to delete the volume “and all files on that volume” and to back up or move any important files first. Move your files off the new drive before you go any further.
  • Extend Volume then reclaims the space. Right-click the original volume, select Extend Volume, select Next in the Extend Volume Wizard, keep the maximum available space on the Select Disks page, select Next and then Finish.

The catch is location. Microsoft’s extend a basic volume page says the unallocated space must sit immediately after the volume you want to extend, on the same disk, and the volume must use NTFS or ReFS. That is why it pays to decide on sizes before you shrink: adding a few gigabytes later is not a quick adjustment.

When the numbers don’t add up

What you see Microsoft’s explanation What you can do
Shrink offers far less than the free space on the volume Certain files, such as the paging file or the shadow copy storage area, can’t be moved, and you can’t shrink past the point where they sit Accept the smaller amount, or free space on another disk instead
Shrink refuses to shrink at all Too many bad clusters detected on the volume, or the volume does not use NTFS Back up the volume’s files; a disk with many bad clusters needs attention before partitioning
Extend Volume is greyed out No unallocated space directly after the volume on the same disk, or the file system is not NTFS or ReFS Check where the unallocated block sits in the disk bar
A USB disk won’t initialize Microsoft notes that some USB disks can’t be initialized Format the drive instead of initializing it
The option you need is greyed out on a work PC Disk changes need administrator rights Ask your IT department

Microsoft also describes moving the paging file or deleting stored shadow copies temporarily to free more room for a shrink. Those changes affect how Windows runs and what restore points you keep, so they are best left alone unless you are comfortable with both.

Windows 10 partition questions

Why does the wizard want to format the new volume?

Windows can only store files on a volume that has a file system. Formatting creates one. On new, unallocated space there is no data to lose; the Do not format this volume option is there if you plan to format it later.

Still need to fit the drive itself? Start with installing a second hard drive in Windows 10 and 11, then come back to split it.