Active signal mode is a readout on the Advanced display page of Windows 11, not a setting you can type into. It changes when you pick a different Display resolution or a different rate in Choose a refresh rate. For one exact combination, the display adapter’s List All Modes dialog sets it in a single step. If the line won’t match what you chose, the cause is usually scaling or the cable path.
What the Active signal mode line tells you
Open Start > Settings > System > Display > Advanced display. If more than one screen is connected, pick the one you care about at the top of the page first. The Display information panel on that page shows, in Microsoft’s words, “the current resolution and refresh rate for the selected display, and whether the display supports variable refresh rate (VRR).”
Inside that panel you will usually see two related lines, Desktop mode and Active signal mode. Microsoft’s support pages do not define either one, but Microsoft support staff answering on Microsoft Q&A have described them this way:
- Desktop mode is the resolution and refresh rate Windows is using for that monitor.
- Active signal mode is the resolution and refresh rate of the signal coming out of the graphics card.

On most PCs the two lines match. When they differ, the image is usually being scaled by the graphics card or by the display itself, which is not automatically a fault. If text looks sharp, the picture fills the screen and the refresh rate is the one you chose, leave it alone.
Which setting changes which part of the signal
Each part of the readout is controlled from a different place.
| Part of the signal | Where you change it | Notes |
|---|---|---|
| Resolution | Settings > System > Display > Display resolution | The option marked (Recommended) is the one Microsoft suggests keeping. |
| Refresh rate | Advanced display > Choose a refresh rate | Only rates the display reports are offered. |
| Variable rate | Advanced display > Dynamic refresh rate toggle | Appears only on hardware that supports it. |
| Exact resolution, color depth and rate together | Display adapter properties > List All Modes | Lists every mode the driver offers for that screen. |
| Size of text and apps | Settings > System > Display > Scale | Does not change the signal at all. |
If your goal is bigger text, change the scale instead of lowering the resolution, as covered in changing DPI and display scaling in Windows 11. Scale leaves the signal at the screen’s native resolution, so the picture stays sharp.
Change the resolution part
- Go to Settings > System > Display and select the screen at the top if you have several.
- In the Display resolution row, open the list and choose an option. Microsoft says it is “usually best to stick with the one that’s marked (Recommended).”
- Windows applies the change and asks whether to keep it. Confirm with Keep changes if the picture looks right. If you can’t see anything, don’t press anything: Windows goes back to the previous mode by itself after a short countdown.
- Return to Advanced display and check that the Active signal mode line now shows the resolution you picked.
Microsoft’s screen resolution and layout page warns that a resolution below the native one can make text less sharp or leave the picture small, boxed in or stretched. For a fixed 1080p target on an older PC, see setting 1920 × 1080 in Windows 10; to do it without a mouse, there is a way to change screen resolution using only the keyboard.
Change the refresh rate part
- On Advanced display, open the list next to Choose a refresh rate.
- Pick the rate you want. A rate with an asterisk (*) doesn’t support your current resolution, and Microsoft notes that choosing it “will cause your display resolution to change” as well.
- Confirm the change when Windows asks, then read the Active signal mode line again.
On the same page, the Dynamic refresh rate toggle turns DRR on or off. Microsoft says DRR “requires that a display supports VRR and a refresh rate of at least 120 Hz”, so many screens never show the toggle. Microsoft also notes that lowering the refresh rate can save battery power on a laptop. Full details are on Microsoft’s refresh rate page.
Pick one exact combination from the adapter’s mode list
For a particular pairing, such as 2560 × 1440 at 144 Hz, the older adapter dialog lists every mode the driver offers for that screen. Microsoft’s support articles don’t document this dialog, so the labels below are the ones Microsoft Q&A replies use.
- On Advanced display, select Display adapter properties for Display 1 (the number matches the screen you selected).
- On the Adapter tab, select List All Modes.
- Choose an entry, for example 2560 by 1440, True Color (32 bit), 144 Hertz.
- Select OK, then select Keep changes when Windows asks.
Choose only modes that appear in this list. If the line still won’t change, a simple test is to apply a different listed mode, confirm it, then go back and apply the one you wanted.
When the line won’t move: scaling, cable path, then driver
If you set 1920 × 1080 and the line still reports 3840 × 2160, or a 144 Hz monitor still shows 60 Hz, work through these in order. The early checks take seconds.
Scaling in the graphics software
Graphics apps can scale a lower desktop resolution up to the panel’s native mode. Desktop mode then follows your choice while Active signal mode stays at native, which is expected. NVIDIA documents an Adjust Desktop Size and Position page under Display in NVIDIA Control Panel. AMD Software: Adrenalin Edition and Intel Graphics Command Center have their own display settings; option names vary by version, so check the maker’s help for your app.
Cable, port, dock and adapter
- On a desktop PC with a separate graphics card, plug the monitor into the card’s port, not the video port on the motherboard.
- Remove docks, adapters, KVM switches and extension cables, and connect directly to test. Any part of the chain can limit the available modes.
- Try another cable and another input on the monitor.
- Open the monitor’s own on-screen menu, confirm the right input is selected, and check whether it has a high refresh rate option for that input.
The graphics driver
If the mode list is very short or the resolution resets after a restart, suspect the driver. First check which graphics driver Windows 11 is using, then install updates through Windows Update or from your PC or graphics card maker. If Windows ever changes resolution on its own, Microsoft suggests checking for graphics driver updates through Windows Update.
TVs, 4K screens and second monitors
A 4K TV used as a monitor can keep a 3840 × 2160 signal even when the desktop is set lower, because the scaling happens in the graphics card or in the TV. If everything looks too small at native resolution, increase Scale instead. Some TVs also show the incoming signal on an information screen in their own menu.
With two or more screens, each one has its own Active signal mode, and the line describes only the screen selected at the top of Advanced display. To rule out an interaction between screens, test with one display connected, then add the second. The arrangement itself is set on the main Display page, as shown in extending your display on Windows 11. If you’re unsure which screen Windows calls Display 1, how monitor numbers work in Windows 11 explains the numbering, and changing monitor 1 and 2 covers the main display and layout.
Windows 10 and custom resolutions
On Windows 10 the same information sits under Settings > System > Display > Advanced display settings, and checking a monitor’s refresh rate in Windows 10 walks through that page. Microsoft ended support for Windows 10 on October 14, 2025. If a Windows 10 screen ends up in a mode you can’t use, resetting display settings in Windows 10 gets it back to the defaults.
Windows Settings has no box for typing a custom resolution or refresh rate. Stick to modes the monitor lists; forcing a mode a screen doesn’t report can leave it blank.
Signal mode answers
Is a mismatch between Desktop mode and Active signal mode a problem?
Not by itself. It usually means scaling is happening. Act on it only when the picture looks soft, is boxed in by black bars, or the refresh rate is lower than the one you chose.
Why does a 1080p desktop show a 4K active signal?
Usually the graphics card or the screen is scaling your 1080p desktop up to the panel’s native 4K mode. Pick a 1080p entry in List All Modes if you need a true 1080p signal, or go back to the recommended resolution and raise Scale.
Why did the active signal change when I plugged in a second monitor?
Each screen gets its own mode, and connecting another screen can change which modes Windows and the graphics card offer. Select each screen at the top of Advanced display and check its line separately.
Once the line shows the mode you want and the picture looks right, you’re done. If text is now the wrong size, finish with Scale rather than the resolution list.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.