Size up the built-in tool first: File History in Windows 10 copies your files to an external drive on a schedule and keeps older versions, so you can go back to yesterday’s copy or last month’s. Microsoft describes it as backing up your libraries and the folders you add; it is a file backup, not a copy of Windows or your apps. You turn it on once in Control Panel, leave the drive connected, and Windows does the rest.
What “automatic” means in File History
Once File History is on, there is nothing to start by hand. Windows checks the folders it is watching and saves copies of anything new or changed to the backup drive, again and again, for as long as the feature stays on. Microsoft’s Backup and restore with File History page covers both Windows 10 and Windows 11 and describes three parts to the job:
- A destination. An external drive (a USB hard drive, SSD or large flash drive) or a network location such as a shared folder on another PC.
- A set of folders. By default, your libraries: Documents, Pictures, Videos and Music, plus any custom libraries you created. Microsoft’s setup text also names the Desktop.
- A history. Each time a file changes, a new copy is kept beside the older ones, so a single document can have many dated versions on the drive.
That last part is what separates File History from simply copying a folder to a drive. If a spreadsheet gets overwritten with bad numbers on Tuesday, a plain copy made on Wednesday would hold the bad numbers too. File History still has Monday’s version.
What it leaves out
Microsoft’s page lists libraries, the Desktop and folders you add; it describes nothing beyond your files. For Windows, installed programs and settings you need a system image instead. If the internal drive fails completely, you would reinstall Windows and your apps first, then pull your files back from the File History drive. Files stored in other places (a folder you created at the root of the C: drive, for example) are not covered until you add them to a library, which is explained further down.
If you want a copy of the whole system, including Windows and apps, that is a different tool, the system image, which is covered with the other options in four ways to back up files on Windows 10. Many people run File History for everyday files and keep a system image as an occasional extra layer.
Pick and prepare the backup drive
File History will use almost any drive Windows can write to, but a few choices make it work better over time.
- Size. The first backup is about the size of the folders you protect. After that the drive keeps growing as old versions pile up. A drive several times larger than your libraries gives the history room to build without filling up in a few months. You can check how big your folders are by right-clicking a library folder in File Explorer and choosing Properties.
- A separate physical drive. A second partition on the same internal disk does not protect you if that disk fails. Use an external drive or a network location.
- A drive you can leave connected. The schedule only runs while Windows can reach the drive. A desktop PC with the drive plugged in all the time gets the most complete history. A laptop user who connects the drive once a week gets a weekly snapshot plus whatever Windows saved in between.
- A network share, if you have one. Microsoft lists a network location as a valid target. That suits a household with a second PC or a network storage box that stays on.
Plug the drive into a USB port and wait until it appears under This PC in File Explorer. If it does not show up, try a different port or cable before going further, because File History can only offer drives Windows already sees.
Turn File History on in Control Panel
Microsoft documents the Control Panel route, and it is the same on Windows 10 and Windows 11. On Windows 10, File History can also be set up from Settings (see the next section), but both routes switch on the same feature.
- Connect the external drive (or make sure the network folder is reachable).
- Open Control Panel. The quickest way is to type Control Panel in the search box on the taskbar and select it.
- Under System and Security, select Save backup copies of your files with File History. If Control Panel is in icon view instead of category view, select File History from the list.
- Select Turn on. File History picks a connected external drive on its own and starts the first backup.
- If it picked the wrong drive, select Select drive. In the Select a File History drive window, choose the external drive or network location you want, then select OK.
The first run copies everything in the protected folders, so it can take a while on a large photo or video library. You can keep using the PC while it runs.
If File History refuses to turn on, check whether an older Backup and Restore (Windows 7) schedule is active on the PC. Microsoft notes that File History can’t be turned on while such a schedule exists, and it doesn’t recommend running both features together. The section on the older tool below explains where it fits.
The Settings route on Windows 10
Windows 10 also shows a backup page in Settings, under Update & Security > Backup, with an option labeled Add a drive under the File History heading and an Automatically back up my files switch once a drive is chosen. Microsoft’s current File History page no longer describes this route, so treat these labels as what Windows 10 has shown rather than documented wording. If the Settings page looks different on your PC, use Control Panel, which reaches the same feature.
Set the schedule and how long versions are kept
Two settings decide how “automatic” the backup really is: how often Windows saves copies, and how long it keeps old ones. In the Control Panel File History window, they sit under Advanced settings. On the Windows 10 Settings backup page, they are under More options. Microsoft’s support page does not list the exact choices, so the values below are what File History has offered on Windows 10 and may differ slightly on your PC.
| Setting | Choices Windows 10 has offered | Default | How to choose |
|---|---|---|---|
| How often to save copies | From every 10 minutes up to daily | Every hour | Keep hourly for most people. Pick more often if you edit important files all day; pick daily on a slow drive or a laptop that is rarely connected. |
| How long to keep saved versions | From 1 month up to forever, or until space is needed | Forever | “Forever” keeps the longest history but fills the drive. A year or “until space is needed” suits a smaller drive. |
Frequent saves kept forever fill a drive fastest with large files such as video; if the drive gets tight, shorten the keep period first.
The same Advanced settings area has had a Clean up versions option for deleting copies older than a period you choose. Use it with care: anything it deletes is gone from the backup. If the drive fills, make room by shortening the keep period, running Clean up versions, or moving the backup to a bigger drive (see below).
Choose which folders are protected
By default File History follows your libraries. You can widen or narrow that list.
Add a folder
Microsoft’s method is to add the folder to a library, because File History follows libraries:
- Open File Explorer and find the folder you want backed up (for example, a folder called Projects at the root of the C: drive).
- Right-click it. On Windows 10 the menu shows Include in library directly; on Windows 11, Microsoft’s steps go through Show more options > Include in library.
- Pick an existing library such as Documents, or create a new library for it.
The folder stays where it is on the disk. The library only points to it, and File History starts including it at the next scheduled save. On Windows 10, the Settings backup page under More options has also had an Add a folder button under Back up these folders, which does the same job without touching libraries.
Leave a folder out
Large folders that don’t need a history, such as a downloaded game library or a temporary video export folder, can eat space fast. The Control Panel File History window has had an Exclude folders link, and the Windows 10 Settings page an Exclude these folders list, where you add folders to skip. Neither label appears on Microsoft’s current support page, so look for them rather than relying on the exact wording.
Check that backups are really running
An automatic backup that quietly stopped is worse than none, because you think you are covered. Spend two minutes on these checks after setup and again every few weeks.
- Open the File History window in Control Panel. It shows which drive is in use and, once a backup has finished, when files were last copied. A Run now link starts an extra save right away.
- Open the backup drive in File Explorer. A folder named FileHistory should be there, with your user name and PC name inside. Seeing recent dates on the folders inside is a good sign.
- Do a test restore of one unimportant file using the steps in the next section. A backup you have restored from once is a backup you can trust.
If the window says the drive is disconnected, reconnect it. Microsoft does not document what File History does with saves it missed while the drive was away, so don’t leave the drive unplugged for weeks and assume nothing was lost.
Get back a file or an older version
The restore steps Microsoft documents start in File Explorer, not in File History itself:
- Open File Explorer and go to the folder that held the file (or the folder you want to roll back).
- Right-click the folder and select Restore previous versions.
- On the Previous Versions tab, pick a version by date.
- To look before you commit, select Open > Open in File History and browse the files in that version.
- Select Restore to put it back in its original place, or Restore to to save it somewhere else.
Read this before step 5: Microsoft warns that the restored file or folder replaces the current version on your computer, and that the replacement can’t be undone. If you want to compare old and new, use Restore to and choose a different folder, such as a new folder on the Desktop. Then open both copies side by side and keep the right one.
For a file that was deleted rather than changed, the same Previous Versions tab on its parent folder still lists it as long as File History caught it before deletion. If File History was never on, the other routes (Recycle Bin, Ctrl+Z right after the delete, Microsoft’s recovery tool) are collected in seven ways to recover deleted files in Windows 10. To move files off the backup drive by hand instead, for example onto a new computer, see copying files from an external hard drive to a PC.
Move the backup to a different drive
When the first drive fills up, fails or is replaced by a bigger one, point File History at the new drive:
- Connect the new drive.
- Open the File History window in Control Panel and select Select drive.
- Choose the new drive and select OK.
- Windows asks whether to move your existing files to the new drive. Choose to move them if you want to keep the history you built up, or decline to start fresh on the new drive.
Moving keeps the old versions; starting fresh leaves them on the old drive, where you can still open the FileHistory folder in File Explorer. Keep the old drive until the new one has finished at least one full backup.
Where the older Windows backup tools fit
Windows 10 carries two other backup features that people often confuse with File History.
Backup and Restore (Windows 7). This is the older Control Panel tool that can make a system image. Microsoft’s compatibility note on the Windows 7 Backup and Restore feature says it is deprecated and won’t be updated, and says, “We do not recommend using both features at the same time.” It still exists for disk images, but for day-to-day file versions, File History is the tool to use.
Windows Backup. This newer app saves folders, settings and app lists to your Microsoft account and OneDrive, not to an external drive. Microsoft’s Windows Backup page says it is focused on consumer devices, that work or school accounts won’t work, and that a free Microsoft account includes 5 GB of OneDrive storage. Its settings are under Settings > Accounts > Windows backup. It can run alongside File History; one copies to the cloud, the other to your drive. If its prompts keep appearing after you have set up File History, they can be silenced: see turning off Windows Backup notifications.
A good habit for any of these tools is more than one copy in more than one place: the files on the PC, the File History drive, and a second copy kept somewhere else, such as cloud storage or a drive stored away from the house.
Windows 10 is out of support: what that changes
Microsoft’s end-of-support notice puts it plainly: “Windows 10 has reached the end of support on October 14, 2025.” There are no more security fixes from Windows Update (unless the PC is enrolled in Extended Security Updates, which Microsoft offers to consumers until October 12, 2027), and Microsoft says the PC keeps working but is at a greater risk for viruses and malware.
File History keeps running on Windows 10 after end of support. That makes a working backup more valuable, not less, on a PC that no longer gets security updates. It is also the easiest way to carry your files across when you move on: the same backup drive can feed a new PC. Steps for keeping an older PC as safe as possible are in setting up Windows 10 after end of support.
On Windows 11, File History is still in Control Panel with the same steps. For the Windows 11 version of this setup, including a system image, see backing up a laptop to an external drive on Windows 11.
External drive backup questions
Can I use a network folder instead of a USB drive?
Yes. Microsoft lists a network location as a File History target. In the Select a File History drive window, choose the network location instead of a drive. The other PC or storage box has to be on and reachable for each scheduled save.
Can I run File History and Backup and Restore (Windows 7) together?
Microsoft doesn’t recommend using both at once, and File History won’t turn on while a Backup and Restore schedule is active. If you want a system image, create it on demand and leave the schedule off.
Does File History back up my Downloads folder?
Not by default. Downloads is not one of the libraries Microsoft lists. Add it to a library, or add it under Back up these folders on the Windows 10 Settings page, if you want it covered.
How do I stop File History or stop using a drive?
Open the File History window in Control Panel and select Turn off. The backups already on the drive stay there and can still be opened in File Explorer. On the Windows 10 Settings backup page, More options has had a Stop using drive button for the same purpose.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.