Need to reinstall or wipe a PC that will stay on Windows 10, and have Microsoft’s Windows 10 ISO or plan to get it? Rufus writes that ISO to a USB flash drive and makes it bootable: open the ISO in Rufus, set Partition scheme and Target system to match the target PC’s firmware, and select START. If you’d rather not pick any settings, Microsoft’s own tool may suit you better, and the table below helps you decide.
Pick the tool: Rufus or Microsoft’s own
Rufus is not the only way to build this drive. Use the table to decide before you download anything.
| Your situation | Better choice | Why |
|---|---|---|
| You want the fewest decisions | Microsoft’s Media Creation Tool | It downloads Windows 10 and writes the USB in one run, with no partition settings to choose. |
| You already have a Windows 10 ISO from Microsoft | Rufus | It writes the file you have instead of downloading Windows again. |
| The target PC only starts in older BIOS mode, or only in UEFI mode | Rufus | You choose the partition scheme and target system yourself. |
| You can’t run extra programs on the PC | Command Prompt (diskpart) | Everything uses tools already in Windows. |
| You only have a Mac | The Mac method | Rufus runs on Windows only. |
For Microsoft’s route, see creating Windows 10 installation media or the shorter bootable Windows 10 USB drive walkthrough. The command-line route is in making a bootable Windows 10 USB with diskpart.
Windows 10 support has ended: what a fresh USB is for
Microsoft’s wording is plain: “Windows 10 has reached the end of support on October 14, 2025.” Its end-of-support page adds that the consumer Extended Security Updates (ESU) program “can protect your Windows 10 device till October 12, 2027.” A Windows 10 install drive still has real uses: reinstalling a PC that can’t move to Windows 11, fixing a corrupted system, or wiping a computer before it goes to someone else. If you plan to keep running Windows 10, the choices about updates and ESU are covered in setting up Windows 10 after end of support.
Gather these first
| Item | What you need | Source of the rule |
|---|---|---|
| USB flash drive | At least 8 GB. Microsoft recommends a blank one because “any content on the drive is deleted.” | Microsoft |
| Windows PC to run Rufus | Windows 8 or later. rufus.ie lists a standard and a portable build for x64 PCs, and standard builds for x86 and ARM64 PCs. | rufus.ie |
| Windows 10 ISO file | Downloaded from Microsoft (next section). | Microsoft |
| Product key | “A 25-character product key might be needed (not required for digital licenses).” | Microsoft |
| Backup | Copy anything you need off the USB drive and, for a clean install, off the target PC. | Both erase data |
Download Rufus only from its official site, rufus.ie, and pick the current release in its Download list rather than a beta. Copies on other download sites don’t come from the developer, so skip them.
Get the Windows 10 ISO from Microsoft
Microsoft’s Download Windows 10 page changes what it offers depending on the computer you visit it from. Both routes give you the same official Windows 10 files.
On a Windows PC
The page offers the Media Creation Tool under Create Windows 10 installation media and notes that you “will first need to have a license to install Windows 10.” The tool can save an ISO instead of writing a USB. Run the tool, accept the license terms, choose Create installation media for another PC, pick the language, edition and architecture for the target PC, then choose ISO file instead of USB flash drive.
On a Mac, Linux PC or tablet
Microsoft routes you to a page titled Download Windows 10 Disc Image (ISO File). Under Select edition, choose Windows 10 (multi-edition ISO), select Confirm, choose the product language, and follow the download links. You still need a Windows PC to run Rufus. More detail on both routes is in downloading the Windows 10 ISO file.
Use only Microsoft’s ISO. Images passed around on other sites can be modified, and Rufus will write whatever file you give it.
Rufus settings, field by field
Rufus fills most fields in by itself once it reads the ISO. Two of them, Partition scheme and Target system, must match the firmware of the PC you will install on, and that is the setting most often behind a drive that won’t start.
| Field | What to choose | Why it matters |
|---|---|---|
| Device | Your USB flash drive | Everything on it is erased. Check the size and name. |
| Boot selection | Select SELECT and open your Windows 10 ISO | Tells Rufus what to write. |
| Image option | Standard Windows installation | Makes a normal installer. |
| Partition scheme | GPT for a UEFI PC, MBR for an older BIOS PC | The Rufus FAQ: with GPT the USB is “bootable in UEFI mode only”; with MBR and BIOS or UEFI-CSM it is “bootable in BIOS-mode only.” |
| Target system | UEFI (non CSM) with GPT, BIOS (or UEFI-CSM) with MBR | The FAQ notes the BIOS option will not work on a UEFI PC “unless you have enabled CSM.” |
| Volume label, File system, Cluster size | Leave what Rufus picked | The FAQ says UEFI does not force FAT32, and to trust Rufus when it allows a file system. |
Not sure which firmware the target PC uses? The Rufus FAQ says you must know whether the PC is BIOS or UEFI based, because Rufus has no way to tell for the computer you will install on. Check the PC maker’s documentation or its firmware settings screen. A PC that meets Windows 11’s requirements has UEFI firmware, since Microsoft lists “UEFI, Secure Boot capable” among them.
Write the drive
- Plug in the USB drive and open Rufus. The portable version runs straight away; Rufus says that “once downloaded, the application is ready to use.”
- Under Device, pick the flash drive. Rufus doesn’t list USB hard drives by default, which protects backup drives from being wiped by mistake.
- Under Boot selection, select SELECT and open the ISO.
- Set Partition scheme and Target system from the table above.
- Select START.
- If Rufus shows an optional customization window, leave every box in it unchecked and continue. A plain installer is what this article covers.
- Read the warning. The Rufus FAQ calls it “a very clear extra warning that lets you know that all partitions will be destroyed.” Confirm only if the right drive is selected.
- Wait until the Status bar shows that Rufus has finished, then close Rufus and eject the drive.
Start the PC from the USB and install Windows 10
- Plug the drive into the target PC and turn it on.
- Open the boot menu. Microsoft says the key “varies by device manufacturer and model but is usually one of the function keys” (F1 through F12) “at the top of the keyboard or the DEL key.” The PC maker’s support site lists the exact key.
- Choose the USB drive. A GPT drive appears only when the PC starts in UEFI mode.
- Follow the Windows Setup screens. For a clean install, choose the custom installation and the drive to install to. Deleting partitions erases them for good, so check the backup first.
- When the PC restarts, take the USB drive out so it doesn’t start Setup again.
If the PC starts straight into the old Windows instead, Microsoft notes the PC may not have shut down fully: choose Shut down, then try again. Boot-mode and boot-order fixes are in booting Windows 10 from USB, and the full erase-and-reinstall plan is in wiping Windows 10 for a clean install.
When the drive won’t boot
| What you see | Likely cause | What to do |
|---|---|---|
| The USB isn’t in the boot menu | Partition scheme doesn’t match the PC’s firmware mode | Remake the drive with the other scheme and target system. |
| A Secure Boot message on startup | An old Rufus version | The FAQ says you “should no longer have to disable Secure Boot if you use Rufus 3.17 or later.” Download the current release and rewrite the drive. Keep Secure Boot on. |
| Rufus doesn’t list your drive | It’s a USB hard drive or SSD, which Rufus hides by default | Use a USB flash drive. |
| Setup asks for a product key | A key can be needed on a PC without a digital license | Install the same edition the PC had before; Microsoft says a key is not required for digital licenses. |
Need Windows 11 instead?
If the PC meets Windows 11’s requirements, Microsoft’s own media is the better long-term choice, because Windows 11 still gets updates. The process starts from a different download page and the Media Creation Tool, explained in creating a Windows 11 installation USB drive.
Rufus USB questions
Does Rufus run on Windows 7?
No. rufus.ie lists the system requirement as Windows 8 or later. On an older PC, make the drive on a newer computer and carry it over.
Standard or portable download: which one?
Either works on an x64 PC: rufus.ie lists a standard and a portable build for x64. The portable file is handy on a PC where you’d rather not install anything. For x86 and ARM64 PCs, rufus.ie lists a standard build only.
Can I make this drive on a Mac?
Not with Rufus, which is a Windows program. A Mac can still build one with its own tools: see creating a Windows 10 bootable USB on a Mac.
Keep the finished drive with the PC: if Windows 10 ever fails to start, the same drive gets you back into Setup.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.