Word can change a footer only where a section changes. To give a page its own footer, put a Next Page section break in front of it (Layout > Breaks > Next Page), then turn off Link to Previous in the new section’s footer and type the new text. Different First Page and Different Odd & Even Pages need no breaks at all.
Steps are for Word for Microsoft 365 on Windows, with Mac and web notes.
A new document is one section, and every page in a section shares a single footer. Typing on page 7 changes the footer on page 1 because, as far as Word is concerned, they are the same footer. A section break splits the document into parts, and each part can carry its own footer, header, page numbering and orientation.
Splitting alone is not enough. A new section’s footer starts out linked to the section before it, so you have to break that link before the footers can differ: one break where the change starts, one click on Link to Previous.
Before you start, pick the option that matches your goal:
| What you want | What to use | Section break needed? |
|---|---|---|
| No footer, or a different one, on page 1 only | Different First Page | No |
| One footer on left pages and another on right pages | Different Odd & Even Pages | No |
| A new footer from a certain page onward (a new chapter or appendix) | Next Page break plus Link to Previous off | Yes, one per change |
| Page numbers that restart or change style | Next Page break plus Format Page Numbers | Yes |
If the document has no footer yet, add one first; adding a custom header or footer in Word covers the built-in designs and blank footers. Then follow these steps, which match Microsoft’s instructions to configure headers and footers for different sections.
- Click at the very start of the first page that should get the new footer (before the first word on that page).
- Go to Layout > Breaks and choose Next Page under Section Breaks. Word starts a new section on the following page. If an empty page appears, see the blank-page fix under When the footers keep changing together.
- Double-click the footer area on the first page of the new section. The Header & Footer tab opens on the ribbon.
- Select Link to Previous so it is no longer highlighted. The footer in this section is now independent of the one before it.
- Delete the old footer text and type the new footer. The earlier pages keep their original footer.
- Select Close Header and Footer, or press Esc.

Headers and footers are linked separately. If the header should change too, click in the header of the new section and turn off Link to Previous there as well. Leaving it on is fine when only the footer needs to differ.
Microsoft’s section break options also include Continuous, Even Page and Odd Page. For footers, Next Page is the one Microsoft’s footer steps use, because it puts the new section on a fresh page. The other types and when to use them are explained in creating sections in Word.
Suppose a report has a cover page, a two-page table of contents, three chapters and an appendix, and each part needs a different footer. Here is the plan:
| Part | How it gets its footer | Footer text |
|---|---|---|
| Cover page | Different First Page turned on in section 1 | Blank |
| Table of contents | Rest of section 1 | Draft for review |
| Chapters 1 to 3 | Next Page break before Chapter 1, Link to Previous off | Annual Report, with page numbers starting at 1 |
| Appendix | Next Page break before the appendix, Link to Previous off | Appendix, page numbers continuing |
That is four footers from only two section breaks. After adding the breaks, open the footer on the first page of Chapter 1; if it is blank like the cover, clear Different First Page in that section (and in the appendix section). Adding breaks only where the footer actually changes keeps the document easier to edit later.
A different first page
- Double-click the header or footer area.
- On the Header & Footer tab, select Different First Page. Microsoft notes that it is a toggle, so make sure it is selected.
- Type the first-page footer, or leave it empty for a clean cover page.
- Select Close Header and Footer or press Esc.
Microsoft’s page on how to delete the header or footer from the first page also has Mac and web tabs; the web version uses Insert > Header & Footer > Options. If you also want the page number missing from page 1, see skipping page numbers in Word.
Different odd and even pages
Bound reports often put the page number on the outside edge, so odd and even pages need mirror-image footers.
- Double-click the header or footer area.
- Select Different Odd & Even Pages.
- Edit the footer on an odd page, then on an even page.
- Close the footer when you are done.
Different First Page is set separately in each section, but Different Odd & Even Pages applies to the whole document, so every section gets separate odd and even footers once it is on. Microsoft’s odd and even footer instructions cover each platform.
Restart page numbers in a section
A different footer often goes with different numbering, such as roman numerals for the front matter and 1, 2, 3 from Chapter 1.
- Add the Next Page break and turn off Link to Previous in the new section’s footer, as above.
- With the footer open, select Page Number > Format Page Numbers.
- Pick a Number format if you want a different style.
- Under Page numbering, select Start at and type the first number, such as 1.
- Select OK, then Close Header and Footer.
These steps follow Microsoft’s guide to page numbers in different sections, which also has a macOS tab.
Word has no per-page footer setting. The only way to give literally every page its own footer is to make every page its own section: a Next Page break before each page, then Link to Previous off in each footer. It works, but if text in one section grows past a page, Word adds a page to that section that repeats the same footer, and the pages after it shift.
For a short set of forms that can be acceptable. For anything longer, put breaks only where the content changes, or move page-specific text into the page body.
Microsoft’s answer for a single page is the same mechanism: use a section break, not a page break. Put the page in its own section with a Next Page break before and after it. First turn off Link to Previous in the footer of the section after that page, so the following pages keep their footer. Then open the page’s own footer, turn off Link to Previous there, and choose Footer > Remove Footer on the Header & Footer tab. Removing a footer in Word walks through the one-page, one-section and all-pages cases.
Word for Mac and Word for the web
Word for Mac: the steps match Windows. Use Layout > Breaks > Next Page, double-click the footer on the page after the break, and deselect Link to Previous. Different First Page, Different Odd & Even Pages and Format Page Numbers are there too.
Word for the web: Microsoft says Word for the web can add page breaks but cannot add section breaks yet, so section-specific footers have to be set up in the desktop app (use Open in Word if you have it). The browser version does have a first-page option and an odd/even option: select Insert > Header & Footer, then Options, and choose Different First Page or Different Even & Odd Pages.
- Editing one footer changes all of them: Link to Previous is still on in that section. Open the footer and select it to turn it off.
- Link to Previous is grayed out: Microsoft says to check that a section break was actually created. A page break (Ctrl+Enter) looks similar on screen but does not start a section.
- You can’t see where sections start: go to Home and select Show/Hide (¶) to display formatting marks, including section breaks.
- The header changed but the footer didn’t (or the reverse): each one has its own Link to Previous button. Unlink both if both should differ.
- A blank page appeared: this usually means the break went in at an empty paragraph or next to a manual page break. Show formatting marks and delete the extra page break or empty paragraphs before the section break.
- Footers shifted after deleting a break: deleting a section break merges two sections, so their footers can change. Undo with Ctrl+Z, then see deleting a section break in Word before trying again.
Can one section have two different footers?
Only through the built-in options. Different First Page and Different Odd & Even Pages give a section up to three footers (first, odd, even). Anything beyond that needs another section.
Will unlinking erase my existing footer?
No. The new section keeps a copy of the footer it had, so nothing disappears until you edit it. The link and unlink behavior in more depth, including headers and page numbers, is in linking sections in Word.
Can I reuse a footer I made in another document?
Yes. You can copy and paste it between footers or save it to the footer gallery; copying a header and footer in Word covers each method.
Next step: once the footers look right, scroll through the document in Print Layout and check the first page of each section, since that is where an unlinked footer is easiest to spot.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.