So, you’ve got your AirPods connected to your device, but there’s no sound? Don’t worry, you’re not alone. This is a common problem that many people face, but the good news is, it’s usually a quick fix. In just a few simple steps, you’ll be back to enjoying your music, podcasts, or whatever you love listening to in no time.
AirPods Connected But No Sound: Step by Step Tutorial
Before we dive into the steps, it’s important to understand what we’re trying to achieve. We want to troubleshoot the issue of your AirPods being connected but not producing any sound. This could be due to various reasons such as Bluetooth connection issues, audio settings, or even dirt in your AirPods. Follow these steps to get your AirPods working again.
Step 1: Check the volume
Make sure the volume on your device is turned up.
This may seem obvious, but sometimes the volume is turned down without you realizing it. You can adjust the volume using the volume buttons on your device or through the control center.
Step 2: Check the Bluetooth connection
Ensure that your AirPods are properly connected to your device via Bluetooth.
Sometimes the AirPods may appear to be connected, but the connection is not stable. Try disconnecting and reconnecting your AirPods from the Bluetooth settings on your device.
Step 3: Check the audio source
Confirm that the audio is playing from the correct source.
If you’re using an iPhone or iPad, swipe down from the top right corner to open the control center, then tap on the audio card to check if your AirPods are selected as the audio output.
Step 4: Clean your AirPods
Inspect your AirPods for any dirt or debris that might be blocking the sound.
Use a soft, dry, lint-free cloth to clean the outside of your AirPods. If you see any debris in the speaker mesh, gently brush it away with a clean, dry, soft-bristled brush.
Step 5: Reset your AirPods
If all else fails, try resetting your AirPods to their factory settings.
To reset your AirPods, put them in their case and close the lid. Wait 30 seconds, then open the lid. On your device, go to the Bluetooth settings and forget your AirPods. Then, with the AirPods still in the case and the lid open, press and hold the setup button on the back of the case for about 15 seconds until the status light flashes amber, then white. Reconnect your AirPods to your device.
After completing these steps, your AirPods should be working properly, and you should be able to hear sound from them once again.
Tips for AirPods Connected But No Sound
- Make sure your device’s software is up to date, as outdated software can sometimes cause connectivity issues.
- Try using your AirPods with a different device to see if the problem is with the AirPods or the original device.
- Check the sound settings on your device to ensure that the audio balance is centered and not shifted to one side.
- If you’re using an iOS device, check the Audio Accessibility settings to make sure Mono Audio is turned off, as this can sometimes direct all sound to one AirPod.
- Consider contacting Apple Support if the problem persists, as there may be a hardware issue with your AirPods.
Frequently Asked Questions
What do I do if only one AirPod is working?
Check the audio balance in your device’s settings and make sure it’s centered. If that doesn’t work, try resetting your AirPods.
Can I use AirPods with non-Apple devices?
Yes, AirPods can be connected to non-Apple devices using Bluetooth, but some features may not be available.
How do I clean my AirPods?
Use a soft, dry, lint-free cloth to clean the outside of your AirPods. For debris in the speaker mesh, use a clean, dry, soft-bristled brush.
How do I check the battery level of my AirPods?
On an iOS device, open the case near your device with the AirPods inside, and the battery status will appear on the screen.
How long do AirPods take to charge?
AirPods take about 20 minutes to charge to 50% and about an hour to fully charge.
Summary
- Check the volume on your device.
- Ensure a stable Bluetooth connection.
- Confirm the correct audio source is selected.
- Clean any dirt or debris from your AirPods.
- Reset your AirPods to their factory settings.
Conclusion
AirPods connected but no sound can be a frustrating issue, but it’s often a simple fix. By following the steps outlined in this article, you can quickly diagnose and solve the problem, whether it’s a volume issue, a Bluetooth connection problem, or just a bit of dirt. Remember to keep your AirPods clean, update your device’s software regularly, and reach out to Apple Support if you can’t resolve the issue. With a little bit of troubleshooting, you’ll be back to enjoying your audio in no time. Keep these tips in mind next time your AirPods are connected but silent, and you’ll be a pro at fixing this common problem.
Kermit Matthews is a freelance writer based in Philadelphia, Pennsylvania with more than a decade of experience writing technology guides. He has a Bachelor’s and Master’s degree in Computer Science and has spent much of his professional career in IT management.
He specializes in writing content about iPhones, Android devices, Microsoft Office, and many other popular applications and devices.