If Word recognizes the product number on your pack of labels, Mailings > Labels can lay out the whole sheet for you. If it doesn’t, you can enter the sheet’s measurements and get the same kind of grid. Either way, saving that sheet once as a Word Template (.dotx) means next month’s return-address, file-folder or product labels start from a ready layout instead of a blank page. These steps use Word for Microsoft 365, Word 2024 and Word 2021 on a Windows PC.
What Word actually saves in a label template
A Word label sheet is an ordinary document containing a table. Each table cell is one label, and the cell sizes, gaps and page margins match a particular sheet of labels. Microsoft’s instructions for a sheet of nametags or address labels describe it the same way: Word opens a new document that contains a table with dimensions that match the label product.
When you save that document as a template, Word keeps the grid plus anything you typed or formatted in it, such as a logo in every cell or a font you like. Each time you start a new document from the template, you get a fresh copy and the original stays untouched.
You don’t always need a template. If you just want one sheet of the same label today, the Labels dialog can print a full page of the same label straight away. Microsoft’s create and print labels training page also shows how to print a single label at a chosen position on the sheet, which helps when you’re using up a partly used sheet. Build a template when you’ll print the same layout again or want different text on each label.
Word for Mac has the same Labels tool on the Mailings tab, though some dialogs and the template save location look different, so the menu names below are for Windows. If you work in Word for the web and can’t find these label options, open the file in the desktop app.
Choose where your grid comes from
| Your situation | Starting point | What you need |
|---|---|---|
| The packet shows a product number from a vendor Word lists | Pick the vendor and product in Label Options | The product number |
| Word doesn’t list your product, or the sheet has no number | Build a custom label with New Label | A ruler and the sheet’s measurements |
| The label maker offers a blank Word file for your product | Open that file and save it as your template | The download from the label maker’s own site |
Avery products are the most common case for the first row; see how to use an Avery template in Word for brand-specific lookups and downloads. The rest of this article focuses on getting a grid that matches your sheet and keeping it for reuse.
Measure the label sheet before you open Word
This step only matters if Word doesn’t list your product, but it is where most custom templates go wrong. Measure a real sheet with a ruler, from the edges of the paper rather than the printed label outlines, or copy the numbers from the label maker’s specification sheet, and write them down in one unit (all inches or all millimeters).
- Page size: the full sheet, such as US Letter (8.5 x 11 in) or A4.
- Label width and height: one label, edge to edge.
- Number across and number down: how many labels per row and per column.
- Top margin: from the top edge of the sheet to the top edge of the first label.
- Side margin: from the left edge of the sheet to the left edge of the first label.
- Horizontal pitch: from the left edge of one label to the left edge of the label beside it (label width plus the gap).
- Vertical pitch: from the top edge of one label to the top edge of the label below it (label height plus any gap).
Check the numbers before typing them in. For a fictional 10-per-sheet shipping label on US Letter paper with labels 4 in wide and 2 in high, 2 across and 5 down, a 0.19 in side margin and a 0.12 in gap between columns: 0.19 + 4 + 0.12 + 4 + 0.19 = 8.5 in, which matches the page width. The horizontal pitch is 4.12 in. With a 0.5 in top margin and no gap between rows, the vertical pitch is 2 in, and 0.5 + (5 x 2) + 0.5 = 11 in. If your sums don’t add up to the page size, one measurement is off.
Build the grid from a product number
- Open Word and start a blank document.
- Go to Mailings > Labels. A dialog opens with the label options.
- Select Options.
- Choose the label vendor from the list, then pick the product number that matches your packet, and select OK.
- Leave the address box empty if each label will be different, or type the text you want on every label.
- Select New Document. Word opens the sheet as a table, ready to edit and save.
Selecting Print instead of New Document sends the sheet straight to the printer without giving you a file to keep, so use New Document whenever you want a template.
Build the grid from your own measurements
- Go to Mailings > Labels and select Options.
- Select New Label. Microsoft’s instructions say to use this when you don’t see your product number.
- Give the label a name you’ll recognize later, such as “Shipping 4×2 ten per sheet.”
- Enter the measurements from your list: margins, pitches, label size, the number across and down, and the page size. The field names in this dialog may be worded slightly differently from the list above.
- Select OK to save the custom label, then OK again to return to the Labels tab.
- Select New Document.
Word saves the custom label so you can pick it again from Label Options next time. If Word won’t accept your numbers, most often because the sum of the measurements is larger than the page, go back and recheck the arithmetic. Some label makers note that Word’s label tool can’t handle very small gaps between labels; if that’s your sheet, the label maker’s own blank Word file is the easier route.
Check the grid before typing anything
A quick check now saves a sheet of labels later.
- Show the cell edges. If you can’t see the table lines, click inside the table and go to Layout > Align > View Gridlines, the path Microsoft gives (Layout here is the table Layout tab). For more on what each kind of gridline shows, see how to show gridlines in Word.
- Count rows and columns. They should match the sheet exactly. Narrow spacer columns between labels are normal on sheets with gaps.
- Look for a second page. If the document runs onto page 2, the table is taller than the page. Recheck the top margin and vertical pitch, or see how to fix a table in Word that is off the page.
- Type a word in the first and last cells. This confirms that text lands where you expect at both corners of the sheet.
To change how the text looks, select it, right-click, and choose Font or Paragraph. Format the first cell, then copy it to the others so every label matches.
Store the sheet as a Word Template
Microsoft’s create a template page gives the Windows steps:
- Go to File > Save As.
- Double-click This PC.
- Type a name, such as “Return address labels.”
- In Save as type, choose Word Template. If the labels use macros, choose Word Macro-Enabled Template instead.
- Select Save.
Word saves the file in the Custom Office Templates folder inside Documents. A Word Template uses the .dotx file type. Keep the name descriptive; the product or size in the file name makes it easy to tell several label templates apart. For more detail on the file types, see how to save a Word document as a template.
Open, reuse and update the template
To print a new batch: go to File > New and choose Personal (some versions say Custom), then select your label template. Word opens a new, untitled copy. Type or paste this batch’s text, print, and save the copy as a normal document if you want a record.
To change the template itself: go to File > Open, browse to This PC > Custom Office Templates under Documents, and open the template file. Make your changes and save. New copies pick up the change; documents you already created from it don’t.
When the label size changes: a template made for one sheet won’t line up on a different one unless every measurement matches. Build a new grid for the new sheet and save it as a separate template rather than resizing cells by hand.
To bring a saved template’s styles into a document you’ve already started, see how to apply a template to an existing Word document.
Line the printout up with the sheet
Microsoft recommends printing on plain paper before loading labels into the printer. Hold the test page against a label sheet in front of a light and compare.
- Everything is shifted the same amount: the top or side margin is off. Adjust it by the distance you measured on the test page.
- The offset grows on each row: the vertical pitch is wrong. A small error repeats on every row, so the bottom row is off the most.
- The offset grows across each row: the horizontal pitch is wrong.
- The printout looks smaller or larger than the sheet: check that the print dialog isn’t scaling the page to fit.
- Text near the edges is cut off: many printers can’t print to the very edge of a page. The limits are covered in how to print without margins in Word.
For a custom label, fix the measurement in Mailings > Labels > Options by reopening your custom label’s settings, then create a new document and save it over the old template.
Word label sheet questions
Where did my saved label template go?
Look in the Custom Office Templates folder inside Documents, or under File > New > Personal. If it isn’t there, it was probably saved as a normal document; reopen it and use Save As with Save as type set to Word Template.
Can I use one template for different text on every label?
Yes. Type different text in each cell, as in how to print 30 different labels on one sheet in Word. For addresses kept in a spreadsheet, a mail merge fills the cells for you; see how to mail merge Avery labels in Word.
Once a test page lines up with a real sheet, save the template one last time. From then on, each new batch is a matter of opening it from File > New, filling in the labels and printing.

Kermit Matthews runs Live2Tech from just outside Philadelphia. He is an IT specialist with over 20 years of experience, from a university help desk to small-business IT, IT management and his own consulting practice, and has written tech guides full time since 2020. Steps are checked against the current software on a real device or the maker’s official documentation. More about Kermit.